Technical information

Technical Information • SCS-TRUMPET • CPU Expansion Side Card

Summary of Connectors

Not all of the connectors or other elements listed below may be present or functional on your actual

SCS-TRUMPET board. Assembly of these connectors is highly custom specific. Discuss your needs

(target application) with EKF before ordering, for an optimum CPU & side card configuration.

Front Panel Connectors

AUDIO-IN 3.5mm stereo audio jack, analog audio, software configurable (default = MIC

input)

AUDIO-

OUT

3.5mm stereo audio jack, analog audio, software configurable (default = HP

output)

COM-A Male D-SUB 9-position, RS-232E (exclusive to 2 x USB 2.0 connectors)

COM-B Male D-SUB 9-position, RS-232E (exclusive to dual USB 3.0 and DP connectors)

DP DisplayPort video output connector, latching type

USB2 1 x USB 2.0 receptacle (exclusive to audio jacks)

USB2 2 x USB 2.0 receptacles (exclusive to COM-A connector)

USB3 USB 3.0 dual (stacked) receptacle

On-Board Connectors

FIO Option, 12HP front panel I/O mezzanine card connector, suitable for the C32-FIO

module (UART, USB, PS/2)

M.2-1,

M.2-2

M.2 module sockets, suitable for on-board M.2 style SSD storage modules, SATA

based, 2230-2280 module size, stuffing option, SATA signals derived from CPU via

HSE (ports 2, 3)

SATA SATA drive docking connector, suitable for on-board 2.5-inch SATA SSD/HDD,

stuffing option, SATA signal derived from CPU via HSE (port 1)