Technical information

Technical Information • SCS-TRUMPET • CPU Expansion Side Card
HD Audio Codec
The SCS-TRUMPET is equipped with an ALC262
audio codec, which involves software
configurable I/O cells. Two 3.5mm front panel
audio jacks are provided, both input- and
output-capable (headphones, line in(out).
Additional audio channels would be available
for use via the connector FIO (option).
Microphone (MIC) capable inputs provide a bias
voltage. Headphone (HP) outputs are buffered,
with lower output resistance compared to
straight line outputs (to be considered also for
long cables). Installation of the Realtek audio
driver software is recommended.
ALC262 Port Configurations
Port Name LINE OUT / HP LINE IN MIC Connector
AHPTT not available
BMIC1 T FIO
CLINE1 T FIO
DLINE-OUTTT not available
ELINE2TTTAudio Out
FMIC2TTTAudio In
CD T FIO
S/PDIF FIO
The illustration below shows the Realtek Audio Manager (Windows), menu "Audio I/O". It allows to
setup most ports adequately. The D-SUB connector option is not available for the SCS-TRUMPET.
No Usage
Port A (D-SUB)
Line Out - HP - Line In
Port C (J-FIO)
Line In
Port B (J-FIO)
MIC In
Port D (D-SUB)
Line Out - HP - Line In
Port E (3.5mm OUT)
Line Out - HP - Line In - MIC In
Port F (3.5mm IN)
Line Out - HP - Line In - MIC In
CCO-CONCERT
Realtek Audio Driver Analog Configurations
© EKF
ekf.com
© EKF -21- ekf.com