Technical Information SCS-TRUMPET Mezzanine I/O Expansion Board Multifunction CPU Side Card Edition 6 Document No.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Contents About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Edition History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nomenclature . . . . . . . . . . . . . . . . . . .
Technical Information • SCS-TRUMPET • CPU Expansion Side Card DP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EXP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PCIE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical Information • SCS-TRUMPET • CPU Expansion Side Card About this Manual This manual is a short form description of the technical aspects of the SCS-TRUMPET, required for installation and system integration. It is intended for the advanced user only. The latest version of this document may be obtained from www.ekf.com/s/scs/scs_ti.pdf. Edition History Ed. Contents/Changes Author Date 1 Technical Information SCS-TRUMPET, english, preliminary edition Text #7662, File: scs_ti.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Related Documents Related Information SCS-TRUMPET SCS-TRUMPET Home www.ekf.com/s/scs/scs.html SCS-TRUMPET Technical Information (PDF) www.ekf.com/s/scs/scs_ti.pdf CompactPCI® Serial CPU Cards www.ekf.com/s/serial.html#SC CompactPCI® Serial Home www.ekf.com/s/serial.html CompactPCI® Serial Concept (PDF) www.ekf.com/s/smart_solution.pdf CompactPCI® Serial Products Short Selection (PDF) www.ekf.com/s/serial_concise.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Standards Reference Documents Term Document Origin CompactPCI® Serial PICMG® CPCI-S.0 R. 1.0, R. 2.0 (pending as of 2014-10) www.picmg.org DisplayPort® VESA DisplayPort Standard Version 1.2 www.vesa.org LPC Low Pin Count Interface Specification, Revision 1.1 www.intel.com/design/chipsets/industry/lpc.htm M.2 Module PCI Express M.2 Specification Revision 1.0 www.pcisig.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Features Feature Summary General < < < < < Mixed function mezzanine side card for EKF CompactPCI® Serial CPU boards Provides additional front panel I/O, choice of on-board SATA storage solutions, and optional rear I/O capabilities Suitable e.g.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Feature Summary Rear I/O Options < < < < < < < All rear I/O is optional - available on customers request Rear I/O connector types P1 .. P5 as defined by the CPCI Serial specification Suitable for usage with a rear I/O transition module Suitable for usage with a secondary CPCI Serial backplane Option 4 x SATA 6G Option 6 x USB 3.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card General Information Available as a mezzanine add-on expansion For dual- or triple-screen applications (in board (aka side board) to the SC1-ALLEGRO, addition to the primary DP video connector(s) SC2-PRESTO and SC3-LARGO CompactPCI® on the CPU carrier board), the SCS-TRUMPET Serial CPU cards, the SCS-TRUMPET provides a front panel is equipped with a DisplayPort variety of frequently required I/O functions connector. Two USB 3.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card SCS-0400-TRUMPET © EKF -10- ekf.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card System Requirements The SCS-TRUMPET is a mezzanine side card, to be fixed on top of a suitable CPU carrier board. The pitch between carrier PCB and mezzanine PCB is 4HP, resulting in a 8HP common front panel for the entire assembly. Up to four mezzanine inter-board connectors are in use, for distribution of legacy and high speed I/O signals from the CPU carrier to the side board. These are referred to as HSE (SATA & USB 2.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Storage Options The SCS-TRUMPET can accommodate a 2.5-inch SATA drive (SATA docking connector), which is also suitable for a Half-Slim SATA SSD module as an alternate. The 6G SATA interface is derived from the mezzanine connector HSE (SATA1 channel). In addition, the SCS-TRUMPET can be populated with two M.2 (NGFF) SATA based SSD storage modules, up to the 2280 size. The M.2 sockets are routed to the mezzanine connector HSE, SATA2 & SATA3.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card SCS-TRUMPET • Option on-Board 2.5-Inch SATA Drive HSE COM-B EXP PCIE P6 SCS-TRUMPET 2x USB3 © EKF • ekf.com P5 Option Jedec MO-297 SLIM LITE SSD SATA1 SATA DP Option on-Board P4 SATA SSD/HDD 2.5-Inch AUD OUT AUD IN FIO Option M.2 SATA SSD • 2230 - 2242 - 2260 - 2280 USB2 P3 AUD IN IN AUD USB2 P2 USB2 DP COM-A P1 SCS-TRUMPET © EKF • ekf.com SCS-TRUMPET • Mezzanine Side Board • © EKF • ekf.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card SCS-TRUMPET • Option on-Board M.2 SATA Modules HSE COM-B EXP PCIE P6 SCS-TRUMPET 2x USB3 P5 2280 2260 2242 Option Jedec MO-297 SLIM LITE SSD 2230 DP SATA2 M.2-1 © EKF • ekf.com P4 USB2 2280 2260 2242 2230 SATA3 USB2 AUD IN IN AUD M.2-2 AUD OUT AUD IN FIO Option M.2 SATA SSD • 2230 - 2242 - 2260 - 2280 P3 Option P2 SATA SSD/HDD 2.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Front Panel I/O The SCS-TRUMPET expands the suite of front panel connectors of a particular CPU carrier board by two USB 3.0 receptacles, a DisplayPort video output, 3.5mm Audio In/Out jacks, and a D-Sub connector with EIA-232 signal level COM port pin assignment. Alternatively, a second COM port connector or up to three additional USB 2.0 jacks are available on request.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Sample Front Panel Options 8HP 1 USB 3.0 PG GP USB 3.0 1 USB 3.0 PG GP S DP2 1 HD EB OUT IN D U S B 2 SC2-PRESTO Dual - mDP SCS-TRUMPET STD © EKF • draft - do not scale • ekf.com DP mDP RB USB 3.0 C O M GP 2 DP1 GbE PG C O M GP 2 A U D I O USB 3.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Sample Front Panel Options 12HP 5 1 USB 3.0 PG C O M GP DP U S B S DP2 1 GbE RB HD EB OUT IN 2 SC2-PRESTO Dual - mDP K B / M S D U S B C O M D DP1 DP mDP U S B S DP2 1 GbE RB HD EB C O M C SCS-TRUMPET STD USB 3.0 2 DP1 mDP 1 GP D 2 A U D I O USB 3.0 © EKF • draft - do not scale • ekf.com USB 3.0 © EKF • draft - do not scale • ekf.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Rear I/O As an option, the SCS-TRUMPET can be equipped with up to five rear I/O connectors P1 to P5, as defined by the CompactPCI® Serial specification. Available for rear I/O are three signal groups, SATA, USB, and legacy I/O. If ordered for rear I/O, the SCS-TRUMPET comes populated with 6G SATA and USB 3.0 controllers on-board, which are wired to the RIO connectors P2 and P3 (4 x SATA, 6 x USB 3.0).
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Theory of Operation The SCS-TRUMPET fits on the top side of the CPU board, (the right side when viewing the common front panel). The side board communicates by means of four bottom mount expansion connectors with the host CPU: PCIE (PCI Express x 4), HSE (High Speed Expansion meaning SATA and USB), DP (DisplayPort), and EXP (multi-function legacy I/F such as LPC). Suitable CPU carrier cards e.g.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card SATA Controllers A major goal of the SCS-TRUMPET is to provide versatile storage solutions. Up to four SATA channels are passed through from the CPU carrier card via the side card mezzanine connector HSE. These ports are in use for onboard storage options, i.e. the 2.5-inch SSD/HDD drive, and two M.2 standard mezzanine modules.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card HD Audio Codec The SCS-TRUMPET is equipped with an ALC262 audio codec, which involves software configurable I/O cells. Two 3.5mm front panel audio jacks are provided, both input- and output-capable (headphones, line in(out). Additional audio channels would be available for use via the connector FIO (option). Microphone (MIC) capable inputs provide a bias voltage.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Block Diagram Front Panel I/O 2 x USB 3.0 DisplayPort USB 2.0 2 x USB 2.0 Simplified Block Diagram SCS-TRUMPET © EKF • ekf.com TPS2060 Dual Power Switch 1.5A 1/2 TPS2060 Power Switch 1/2 TPS2060 Power Switch TPS2060 Dual Power Switch 1.5A USB 3.0 Mezzanine Side Card I/O Sheet 1 USB & DisplayPort Mezzanine Side Card I/O 1.1-1.2 USB 2.0 TUSB7320 Option 2 x TUSB7340 to PCIe Option 12HP Front Panel I/O Modul USB 3.0 1.3-1.4 2.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Front Panel I/O SATA 6G SATA 1 SATA 2 SATA 3 Mezzanine Side Card I/O Option 2.5-Inch on-Board SATA SSD/HDD M.2/NGFF 2280 SATA M.2/NGFF 2280 SATA SATA Redriver 2 x 88SE9170 Option to PCIe 6G SATA SATA 6G Simplified Block Diagram © EKF • ekf.com SCS-TRUMPET Sheet 2 SATA Devices PCI Express® 2 x 1 Rear I/O Option Mezzanine Side Card I/O 4-5 SATA 88SE 2.1-2.2 6 SATA HSE 2-3 SATA 88SE 1.1-1.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card OUT IN Front Panel I/O Option RS-232 alternate to 2 x USB3 & DisplayPort LINE 2 HP OUT LINE OUT MIC 2 LINE IN MIC IN Option RS-232 alternate to 2 x USB 2.0 E F Simplified Block Diagram D © EKF • ekf.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Summary of Connectors Not all of the connectors or other elements listed below may be present or functional on your actual SCS-TRUMPET board. Assembly of these connectors is highly custom specific. Discuss your needs (target application) with EKF before ordering, for an optimum CPU & side card configuration. Front Panel Connectors AUDIO-IN 3.5mm stereo audio jack, analog audio, software configurable (default = MIC input) AUDIOOUT 3.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Inter-Board Connectors (CPU Carrier) EXP Dual row socket, available from bottom of the SCS-TRUMPET PCB, mating with the corresponding socket on the CPU carrier board, connected through a board stacker (two sided pin header), comprised of: < LPC Low Pin Count interface < HD Audio (Azalia) < 2 x USB < SMB, Speaker, Reset HSE High speed mezzanine connector, available from bottom of the SCS-TRUMPET PCB, mating with the corresponding connector on t
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Rear I/O Connectors P1 Rear I/O Option, CompactPCI® Serial Backplane Connector Type A < External Power (not required for normal operation of the SCS-TRUMPET < Reset output, SMBus (I2C) P2 Rear I/O Option, CompactPCI® Serial Backplane Connector Type B < USB 2.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Backplane Mounting The SCS-TRUMPET will be used as an assembly together with a CompactPCI® Serial CPU board such as the SC1-ALLEGRO, SC2-PRESTO, or SC3-LARGO.. This assembly order (right aligned system board slot) is recommended because no regular CompactPCI® Serial backplane peripheral slot would get lost. Otherwise, the SCS-TRUMPET would occupy a regular fat pipe slot.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card RIO Main System CompactPCI® Serial Backplane Backplane Reverse Order - System Board Slot Right Aligned CPU Side Card SCSTRUMPET CPCI-S.0 Peripheral Slots SC2PRESTO © EKF • ekf.com System Configuration for a Rear I/O Transition Module Sample Backplane w. System Slot Right Aligned © EKF -29- ekf.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card As an alternate for the rear I/O enabled version, the SCS-TRUMPET can be used together with a secondary CompactPCI® Serial backplane (not suitable for legacy signals, SATA and USB only). This additional backplane must have its system board slot left aligned in order to match the SCS-TRUMPET.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card SC2-PRESTO & SCS-TRUMPET Dual Backplane Configuration © EKF -31- ekf.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card P6 P5 P4 P3 P2 P1 1 SYS 4 x SATA 6G (2 x 9170) 1 x SATA (HSE) 6 x USB3 1 x USB2 Power I2C SCSTRUMPET 2 C32-FIO Option 12HP F/P 4 PER 5 PER 6 PER 7 PER 8 PER 9 SCS-TRUMPET • Resources w.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Sample Backplanes System Slot Left Aligned The SCS-TRUMPET may be also used as an assembly together with a CompactPCI® PlusIO CPU board such as the PC3-ALLEGRO or PC4-PRESTO. Similar to CompactPCI® Serial CPU cards, rear I/O functions of the SCS-TRUMPET can be used by means of a secondary backplane or a transition module.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Installing and Replacing Components Before You Begin Warnings The procedures in this chapter assume familiarity with the general terminology associated with industrial electronics and with safety practices and regulatory compliance required for using and modifying electronic equipment.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Installing the Board Warning This procedure should be done only by qualified technical personnel. Disconnect the system from its power source before doing the procedures described here. Failure to disconnect power, or telecommunication links before you open the system or perform any procedures can result in personal injury or equipment damage.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Removing the Board Warning This procedure should be done only by qualified technical personnel. Disconnect the system from its power source before doing the procedures described here. Failure to disconnect power, or telecommunication links before you open the system or perform any procedures can result in personal injury or equipment damage.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card EMC Recommendations In order to comply with the CE regulations for EMC, it is mandatory to observe the following rules: C The chassis or rack including other boards in use must comply entirely with CE C Close all board slots not in use with a blind front panel C Front panels must be fastened by built-in screws C Cover any unused front panel mounted connector with a shielding cap C External communications cable assemblies must be shielded
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Technical Reference Caution Some of the connectors may provide operating voltage (e.g. +12V, +5V and +3.3V) to devices inside the system chassis, such as internal peripherals. Not all of these connectors are overcurrent protected. Do not use these connectors for powering devices external to the computer chassis.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Front Panel Elements As of current, suitable CPU carrier boards for use together with the SCS-TRUMPET side card are the SC1-ALLEGRO and SC2-PRESTO. The SCS-TRUMPET side board mounts on top (at the right side) of the CPU card. By default, the SCS-TRUMPET shares an 8HP (~40.6mm) front panel with the CPU. When combined with the C32-FIO mezzanine module, the assembly width would be 12HP (~61mm) in total.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card AUDIO-IN 3.5mm stereo audio jack, analog audio, software configurable (default = MIC input) AUDIOOUT 3.5mm stereo audio jack, analog audio, software configurable (default = HP output) COM-A Male D-SUB 9-pin, RS-232E (exclusive to 2 x USB) COM-B Male D-SUB 9-pin, RS-232E (exclusive to DP and USB 3.0) DP DisplayPort front panel video connector LED 1, 2 VBUS power good USB 3.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card AUDIO IN/OUT Audio Jacks The SCS-TRUMPET is equipped with an ALC262 HD Audio Codec, controlled by the PCH (Platform Controller Hub) on the CPU carrier board via the Intel Azalia HDA link. Two 3.5mm stereo audio jacks are available from the SCS-TRUMPET front panel for attachment of audio devices such as audio power amplifier, headphones, microphone. The particular function of each audio jack is controlled by the driver software (e.g. Realtek).
Technical Information • SCS-TRUMPET • CPU Expansion Side Card ALC262 Port Configuration - 3.5mm Audio Jacks Port Name LINE OUT / HP LINE IN MIC Connector E LINE2 T T T Audio Out F MIC2 T T T Audio In The assignment of input or output to the audio jacks is highly ambiguous, due to the software configurable ports E and F of the ALC262. For details of the ALC262 and latest HD Audio driver software, please refer to www.realtek.com.tw. © EKF ekf.com AUDIO OUT Port E (LINE2) Front Panel 3.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card COM-A/B The on-board Super-I/O (SIO) on the SCS-TRUMPET provides four asynchronous serial interfaces, one or two of them optionally available from the front panel (EIA/TIA 232). The other two (TTL-level) are available for rear I/O via P4 as an option, or can be used across the mezzanine connector FIO by means of the C32-FIO mezzanine board (12HP front panel assembly).
Technical Information • SCS-TRUMPET • CPU Expansion Side Card DisplayPort As of current, the Intel graphics processing unit (GPU) on the CPU carrier card incorporates up to three external DisplayPort video channels. At least one video output is available via the CPU card front panel DisplayPort connector. The PC1-GROOVE is equipped with a single standard DisplayPort front panel receptacle, while the SC1-ALLEGRO and other CPU cards offer two mDP (Mini DisplayPort) connectors.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card For attachment of either a classic style analog RGB monitor or DVI type display to the DP front panel receptacle, there are both adapters and also adapter cables available, from DisplayPort to the VGA or DVI connector. Plug Style DP to DVI Adapter Cable Adapter DP to VGA © EKF Cable Adapter DP to DVI -45- ekf.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Specified by the VESA DisplayPort connector standard is a dedicated power pin 20 (+3.3V 0.5A). Both the SCS-TRUMPET (source side) and a DP monitor (sink side) must provide power via this pin. A VESA specified standard DisplayPort cable however must not connect the pins 20 of both cable ends, in order to avoid a back driving conflict.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card USB The host CPU board passes through up to 6 x USB 2.0 ports via the mezzanine connectors HSE (4 x) and EXP (2 x). Two of these USB interfaces are available at the bottom of the SCS-TRUMPET front panel (exclusive to the COM-A connector option). Another USB 2.0 receptacle would be available in the middle of the front panel, if the audio jacks would be omitted.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card USB 3.0 The SCS-TRUMPET is equipped with a dual front panel receptacle, which can accommodate two USB 3.0 or USB 2.0 type A cable connectors (USB root hub). When connected to USB 2.0 compliant devices, only the classic 4 contacts (data pair, +5V and GND) are in use. USB 3.0 devices in addition communicate via the SuperSpeed differential transmit and receive signal pairs, available across another 5 contact pins.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card On-Board Connectors The SCS-TRUMPET can be equipped with several on-board connectors, for I/O and mezzanine module expansion. Some of these connectors are available as an option only or exclusive to each other, and therefore may not be functional or even present on your actual board. Assembly of these connectors is highly custom specific.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card FIO (Mezzanine Expansion Module C32-FIO) I/F Type SOURCE AUDIO Analog (2 x) Codec ALC262 AUDIO S/PDIF (Option) Codec ALC262 PS/2 KB/MS SIO2 Serial (UART) SP3/SP4 SIO2 USB1 - USB2 CPU Carrier (HSE) M.2 (2 x Sockets for M.2 Style SSD) I/F Type SOURCE SATA02 - SATA03 CPU Carrier (HSE) SATA (Host Connector for 2.5-Inch on-Board Drive) © EKF I/F Type SOURCE SATA01 CPU Carrier (HSE) -50- ekf.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card FIO As an option, the SCS-TRUMPET can be expanded by a small front panel I/O mezzanine module, the C32-FIO. This requires a 12HP front panel in total (CPU carrier, SCS-TRUMPET, C32-FIO). The C32-FIO provides additional COM-Ports, USB, and a PS/2 legacy Mini-DIN connector (on request only, not populated by default). FIO is a 2mm pitch dual row socket on top of the SCS-TRUMPET, which connects to the C32-FIO by means of a board stacker element.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card FIO • Secondary I/O Mezzanine Expansion Interface (Audio - COM - PS/2 - USB) 2.00mm Socket 2 x 22 (251.1.0222.10.09) 1 © EKF 251.1.0222.10.09 ekf.com 2 44 2.00mm Socket GND 1 2 +3.3V_CR * SP4_RI# 3 4 SP4_DSR# SP4_TXD 5 6 SP4_RXD SP4_RTS# 7 8 SP4_DTR# SP4_DCD# 9 10 SP4_CTS# GND 11 12 +3.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card ALC262 Analog Port Configuration - FIO Port Name LINE OUT / HP LINE IN MIC Connector B MIC1 T J-FIO C LINE1 T J-FIO CD T J-FIO S/PDIF J-FIO Port C (LINE1) Line In Port B (MIC1) MIC In © EKF ekf.com CCO-CONCERT Realtek Audio Driver Analog Configurations - J-FIO Mezzanine Connector © EKF -53- ekf.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card M.2 Connectors The SCS-TRUMPET is provided with two M.2 module host connectors Type B. After inserted, each M.2 module must be locked manually by a screw, in order to withstand shock and vibration. With two identical M.2 solid-state drives engaged, the SCS-TRUMPET can be used for software RAID level 0/1 operation. HSE COM-B EXP PCIE P6 SCS-TRUMPET 2x USB3 P5 2280 2260 2242 Option Jedec MO-297 SLIM LITE SSD 2230 DP SATA2 M.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card M.2 1-4 • Pin 1 - 38 EKF Part #255.50.1.2242.10 © EKF CFG-3 * 1 2 +3.3V GND 3 4 +3.3V GND 5 6 NC NC 7 8 NC NC 9 10 DA/DSS GND 11 12 B Key B Key 13 14 B Key B Key 15 16 B Key B Key 17 18 B Key B Key 19 20 NC CFG-0 * 21 22 NC NC 23 24 NC NC 25 26 NC GND 27 28 NC NC 29 30 NC NC 31 32 NC GND 33 34 NC NC 35 36 NC NC 37 38 DEVSLP -55- ekf.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card M.2 1-4 • Pin 39 - 75 GND 39 40 NC SATA B+ (SSD OUT) 41 42 NC SATA B- (SSD OUT) 43 44 NC GND 45 46 NC SATA A- (SSD IN) 47 48 NC SATA A+ (SSD IN) 49 50 NC GND 51 52 NC NC 53 54 NC NC 55 56 NC GND 57 58 NC NC M-Key 59 60 NC M-Key NC M-Key 61 62 NC M-Key NC M-Key 63 64 NC M-Key NC M-Key 65 66 NC M-Key NC 67 68 NC CFG-1 * 69 70 +3.3V GND 71 72 +3.3V GND 73 74 +3.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card SATA The SCS-TRUMPET can be equipped with a SATA host receptacle (docking connector), suitable for attachment of an on-board 2.5-inch SATA HDD/SSD. The connector SATA has a reasonable standoff for stuffing components below the drive, which requires 2 mounting rails in order to fix and carry the drive. The SATA signals are passed over from the CPU card via the inter-board mezzanine connector HSE.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Signal designations RX/TX are shown with respect to the SATA host controller. Typical SATA devices are powered from the +5V rail. SATA • Serial ATA Docking Connector Serial ATA host receptacle (256.022.10.02) Part No. 256.022.10.02 • SATA Host Receptacle • © EKF • ekf.com S1 GND S2 SATA01 TXP S3 SATA01 TXN S4 GND S5 SATA01 RXN S6 SATA01 RXP S7 GND P1 +3.3V_SATA P2 +3.3V_SATA P3 +3.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card HSE COM-B EXP PCIE P6 SCS-TRUMPET 2x USB3 © EKF • ekf.com P5 SATA1 SATA DP Jedec MO-297 SLIM LITE SSD Option Jedec MO-297 SLIM LITE SSD P4 AUD OUT AUD IN FIO Option M.2 SATA SSD • 2230 - 2242 - 2260 - 2280 USB2 P3 AUD IN IN AUD USB2 P2 USB2 P1 DP COM-A SCS-TRUMPET • Mezzanine Side Board • © EKF • ekf.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card On-Board Jumpers J-RES Reset Provided as an option, the pin header J-RES can be used for resetting the CPU host board (processor reset) if wired to additional circuitry (e.g. watchdog or manual pushbutton). Tie reset# to GND with an open collector output. While debugging the system, a 2.54mm jumper may be used to force a manual reset. J-RES 1 1=RST# 2=GND © EKF 240.1.02 ekf.com © EKF -60- ekf.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Inter-Board Connectors The SCS-TRUMPET is equipped with 4 inter-board connectors. These are the EXP (LPC and mixed signals), the HSE (SATA & USB), the PCIE (4-Lane PCI Express®), and the DP (DisplayPort) connectors. All host CPU inter-board connectors are situated at the bottom of the SCS-TRUMPET and establish the data path and power link to the carrier board CPU.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card DP I/F Type SC2-PRESTO DisplayPort 4th Generation Intel® Core™ CPU EXP I/F Type SC2-PRESTO LPC (Low Pin Count) PCH (Platform Controller Hub) HD Audio PCH (Platform Controller Hub) SMBus PCH (Platform Controller Hub) 2 x USB 2.0 PCH (Platform Controller Hub) HSE I/F Type SC2-PRESTO SATA01-SATA03 (6G) PCH (Platform Controller Hub) 4 x USB 2.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card CPU Carrier to Mezzanine Side Card Connector Suite © EKF -63- ekf.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card PCIE EXP HSE DP © EKF -64- ekf.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card DP The high speed expansion socket DP is mounted on bottom of the SCS-TRUMPET. This allows to attach the mezzanine companion card on top of the CPU carrier board. A mating strip line PCB (C21PCIEX1 with respect to the SC1-ALLEGRO CPU carrier card, and C66-DP for the PC1-GROOVE CPU) is used in addition to bridge the gap between the two boards, which results from the horizontal 0.8inch (20.32mm) card slot pitch.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card EXP The inter-board connector EXP is mounted on bottom of the SCS-TRUMPET PCB. This allows to attach the SCS-TRUMPET mezzanine companion card on top of the CPU carrier board. A suitable board stacker is used in addition to bridge the gap between the two boards (exactly 4HP distance between PCBs). EXP is used to pass the Low Pin Count I/F to the SCS-TRUMPET, besides two USB channels and some sideband signals.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card HSE The connector HSE is a 10mm height shielded male pin header. Its counterpart on the CPU carrier board is a 8mm height receptacle, for a nominal headroom of 18.72mm between the boards (equivalent to 4HP board to board CL pitch). The SATA transfer speed may vary with the carrier board (6G SATA consistently from SC2-PRESTO off). HSE • SATA & USB Mezzanine Interface 1.00mm Pitch Male Connector 10mm Height (275.90.10.068.51) b1 a1 s1 © EKF 275.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card PCIE 160.15.02.0 © EKF • ekf.com The high speed expansion socket PCIE is mounted on bottom of the SCS-TRUMPET. This allows to attach the mezzanine companion card on top of the CPU carrier board. A mating strip line spacer PCB (C22-PCIEX2) is used in addition to bridge the gap between the two boards, which results from the horizontal 0.8-inch (20.32mm) card slot pitch. ON 1 2 PCIE must be organized as 4 links by 1 lane each (i.e.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Rear I/O Connectors As an option, the SCS-TRUMPET can be equipped with the backplane connectors P1 to P5. A single slot rear I/O backplane (directly adjoining the CompactPCI® Serial backplane) would be required for handing over the available signal lines to a suitable rear I/O transition module.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card P5 P5 CompactPCI® Serial Peripheral Slot Backplane Connector Type C EKF Part #250.3.1208.20.00 • 96 pos.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card P4 P4 CompactPCI® Serial Peripheral Slot Backplane Connector Type B EKF Part #250.3.1208.20.00 • 96 pos.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card P3 P3 CompactPCI® Serial Backplane Connector Type B EKF Part #250.3.1208.20.00 • 96 pos. 12x8, 16mm Width P3 A B C D E F G H I J K L 8 GND 7 SATA TX+ 7 SATA TX- GND 7 SATA RX+ 7 SATA RX- GND 8 SATA TX+ 8 SATA TX- GND 8 SATA RX+ 8 SATA RX- 7 5 (2.2) SATA TX+ 5 (2.2) SATA TX- GND 5 (2.2) SATA RX+ 5 (2.2) SATA RX- GND 6 (HSE) SATA TX+ 6 (HSE) SATA TX- GND 6 (HSE) SATA RX+ 6 (HSE) SATA RX- GND 6 GND 3 (1.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card P2 P2 CompactPCI® Serial Backplane Connector Type B EKF Part #250.3.1208.20.00 • 96 pos. 12x8, 16mm Width P2 A B C D E F G H I J K L 8 GND IO IO GND 2 (EXP) USB2 D+ 2 (EXP) USB2 D- GND 3 (1.3) USB2 D+ 3 (1.3) USB2 D- IO 4 (1.4) USB2 D+ 4 (1.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card P1 P1 CompactPCI® Serial Backplane Connector Type A EKF Part #250.3.1206.20 Type.02 • 72 pos.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Additional Functions SMBus EEPROM The SCS-TRUMPET is provided with a 24C02 2Kbit I2C EEPROM, for storing board configuration data. The EEPROM is accessed via the SMBus. If required, the SMBus EEPROM address A1 can be optionally controlled (stuffing option) by SIO GP34 (serial port 4 DTR#), and the SMBus EEPROM WP is likewise tied to GP67 (serial port 4 RTS4#). © EKF -75- ekf.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Schematics Complete circuit diagrams for this product are available for customers on request. Signing of a non-disclosure agreement would be needed. Please contact sales@ekf.de for details. EKF reserves the right to refuse distribution of confidential information material for any reason that EKF may consider substantial. Ordering Information SCS - 0 X Y Z - Trumpet Front Panel Interfaces - 2x USB 3.0 + DP - 2x USB 3.
Technical Information • SCS-TRUMPET • CPU Expansion Side Card Industrial Computers Made in Germany boards. EKF Elektronik GmbH Philipp-Reis-Str. 4 (Haus 1) Lilienthalstr. 2 (Haus 2) 59065 HAMM Germany systems. solutions. Phone +49 (0)2381/6890-0 Fax +49 (0)2381/6890-90 Internet www.ekf.com E-Mail sales@ekf.
