User guide

User Guide • PC1-GROOVE • Core
TM
i7 CompactPCI
®
CPU Board
Feature Summary PC1-GROOVE
J1
CompactPCI®
< PCH QM57 integrated 32-bit PCI bridge, 33MHz 133MBps CompactPCI master
< Additional PCI arbiter in PLD for fully figured 8-slot CompactPCI backplane
< +5V V(I/O) default configuration (PCI pull-up resistors 1k - blue coding key on J1)
< +3.3V V(I/O) on request (PCI pull-up resistors 2.7k - yellow coding key on J1)
CompactPCI®
Express
< PC1-GROOVE can be configured as CompactPCI Express System Board (system slot
controller) by optionally available mezzanine expansion card CCJ-RHYTHM
< CPCIe 4-Link configuration (4-lanes each), for up to 4 CPCIe peripheral slots type 1 and/or
type 2 on a passive CPCIe backplane
< Suitable also for hybrid CPCI/CPCIe systems/backplanes (e.g. Schroff)
Platform
Management
< Option AMT 6.0 Intel® Active Management Technology (iAMT)
< ARM core based Manageability Engine (ME) in the PCH QM57
< Independent manageability firmware, stored in SPI Flash
Secure
Computing
< Option Trusted Platform Module TPM 1.2 according to Trusted Computing Group
specifications
< Available as discrete controller on several mezzanine boards e.g. CCH/CCI/CCJ
< Discrete crypto engine silicon brands Infineon or Atmel at users choice
BIOS < Phoenix BIOS with EKF enhancements for embedded systems
< SPI Flash memory 2 x 16/32/64 Mb
< Updates available from website ekf.com
Drivers
(All Major OS)
< Intel® graphics driver, Intel® embedded graphics driver
< Intel® networking driver
< Intel® Matrix Storage Manager software
< JMicron SATA driver
Thermal
Conditions
Environmental
Conditions
< Operating temperature: 0°C ... +70°C (extended temperature range on request)
< Storage temperature: -40°C ... +85°C, max. gradient 5°C/min
< Humidity 5% ... 95% RH non condensing
< Altitude -300m ... +3000m
< Shock 15g 0.33ms, 6g 6ms
< Vibration 1g 5-2000Hz
EC Regulations < EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
< 2002/95/EC (RoHS)
MTBF 126 x 10
3
h (14 years) @ 50° C
Typical Power
Requirements
1)
Intel®
SpeedStep®
Frequency Modes
LFM: Low
Frequency Mode,
HFM: High
Frequency Mode
2)
Add per Ethernet
port 0.2/0.6A
(link only/active)
@1Gbps
Board
+3.3V +0.17V/-0.1V +5V +0.25V/-0.15V
MaxPower
LFM/HFM
1)
Win7 Idle
LFM/HFM
1)
MaxPower
LFM/HFM
1)
Win7 Idle
LFM/HFM
1)
PC1-62-GROOVE
6.1/6.4A
2)
2.9/2.9A
2)
2.3/5.8A 0.1/0.1A
S3: 250mA
S4: 80mA
S5: 80mA
S3: <10mA
S4: <10mA
S5: <10mA
© EKF -9- ekf.com