User guide

User Guide • PC1-GROOVE • Core
TM
i7 CompactPCI
®
CPU Board
High Speed Expansion Connector J-HSE
High Speed Expansion J-HSE
GND a1 b1 GND
SATA_HSE1_TXP
3) 5)
a2 b2 SATA_HSE3_TXP
4) 5) 6)
SATA_HSE1_TXN
3) 5)
a3 b3 SATA_HSE3_TXN
4) 5) 6)
GND a4 b4 GND
SATA_HSE1_RXN
3) 5)
a5 b5 SATA_HSE3_RXN
4) 5) 6)
SATA_HSE1_RXP
3) 5)
a6 b6 SATA_HSE3_RXP
4) 5) 6)
GND a7 b7 GND
SATA_HSE2_TXP
4) 5) 6)
a8 b8 SATA_HSE4_TXP
3) 5) 6)
SATA_HSE2_TXN
4) 5) 6)
a9 b9 SATA_HSE4_TXN
3) 5) 6)
GND a10 b10 GND
SATA_HSE2_RXN
4) 5) 6)
a11 b11 SATA_HSE4_RXN
3) 5) 6)
SATA_HSE2_RXP
4) 5) 6)
a12 b12 SATA_HSE4_RXP
3) 5) 6)
GND a13 b13 GND
USB_HSE1_P a14 b14 USB_HSE3_P
USB_HSE1_N a15 b15 USB_HSE3_N
GND a16 b16 GND
USB_HSE2_P a17 b17 USB_HSE4_P
USB_HSE2_N a18 b18 USB_HSE4_N
GND a19 b19 GND
USB_HSE1_OC# a20 b20 USB_HSE34_OC#
USB_HSE2_OC# a21 b21 USB_HSE34_OC#
+3.3VS
1)
a22 b22 +5VS
1)
+3.3VS
1)
a23 b23 +5VS
1)
+3.3VA
2)
a24 b24 +5VA
2)
+12VA
2)
a25 b25 RSVD
1)
Power rail switched on in state S0 only.
2)
Power rail switched on with system power.
3)
This SATA channel is derived from the PCH.
4)
This SATA channel is derived from the JMB362.
5)
All TX/RX designations with respect to SATA controller.
6)
The SATA Port assignment PCH/JMB362 has been changed in Revision 1 of PC1-GROOVE.
WARNING: Neither the +3.3V pins, nor the +5V pins, nor the +12VA pin are protected against a
short circuit situation! This connector therefore should be used only for attachment of the C40-SCFA
adapter or an expansion board. The maximum current flowing across these pins should be limited to
2A per power rail.
a1
s1
s9 s18
s10
a25
b25
b1
1.00mm Pitch High Speed Female Connector (H=8mm)
© EKF • 275.90.08.068.01 • ekf.co
m
© EKF -64- ekf.com