User guide

User Guide • PC1-GROOVE • Core

i7 CompactPCI

CPU Board

Strapping Headers

DSW1 Switches to configurate PCIe link width

P-FPH Jumper to generate Power Button Events (Front Panel Handle Switch)

P-ISP PLD Programming Connector, not stuffed

P-GP Jumper to reset UEFI BIOS Setup to EKF Factory Defaults

P-MFG Jumper to enter Manufacturing Mode, not stuffed

P-RTC Jumper to reset RTC Core of PCH, not stuffed

Connectors & Sockets

J1/J2

CompactPCI Bus 32-bit, 33MHz, PlusIO

J-EXPT

J-EXPB

Expansion Interface Connector (LPC Interface (Super-I/O, FWH), USB

Interfaces, HD Audio Interface, SMBus), available either from top (T)

or bottom (B) of the board

J-HSE High Speed Expansion Connector (4 x SATA, 4 x USB), Interface to

CompactFlash Carrier C40-SCFA and side boards

J-PCIE PCI Express Expansion Interface Connector

J-SDVO2 Digital Display Interface Connector

SODM1 204-pin DDR3 Memory Module SDRAM PC3-8500 Socket

XDP1 CPU Debug Port

Stuffed on customers request only

Front Panel Elements

Ethernet

(ETH1/2)

Dual 1000Base-TX/100Base-TX/10Base-T, RJ-45 Receptacles with

integrated indicator LEDs

Graphics

(DisplayPort)

DisplayPort Receptacle. Alternately available with VGA Connector.

USB1/2 Universal Serial Bus 2.0 self powered root hub, type A receptacle

EB LED indicating PlusIO Ethernet activity

GP General Purpose LED

HD LED indicating any activity on SATA ports

PG LED indicating Power Good/Board Healthy

RB System Reset Button