User Guide PC1-GROOVE • CompactPCI ® PlusIO Core™ i7 Processor High Performance CPU Card Suitable for Classic CompactPCI© and PICMG 2.30 CompactPCI® PlusIO Systems Document No.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Contents About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Edition History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nomenclature . . . . . . . . . . . . . . . . . . . . .
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Configuration Jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configuration Switches PCI Express Link Width (DSW1) . . . . . . . . . . . . . . . . . . . . Loading UEFI BIOS Setup Defaults (P-GP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Manufacturer Mode Jumper (P-MFG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reset Jumper PCH RTC Core (P-RTC) . . .
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board About this Manual This manual describes the technical aspects of the PC1-GROOVE, required for installation and system integration. It is intended for the experienced user only. Edition History Ed. Contents/Changes Author Date gn 2010-03-22 1 User Manual PC1-GROOVE, english, initial edition (Text #5713, File: pc1_uge.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Related Documents Related Information PC1-GROOVE PC1-GROOVE Home www.ekf.com/p/pc1/pc1.html PC1-GROOVE Ordering Information www.ekf.com/p/pc1/pc1_pi.pdf Nomenclature Signal names used herein with an attached '#' designate active low lines. Trade Marks Some terms used herein are property of their respective owners, e.g.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Standards Theme Document Title Origin CompactFlash CF+ and CompactFlash Specification Revision 3.0 www.compactflash.org CompactPCI CompactPCI Specification, PICMG 2.0 R3.0, Oct. 1, 1999 www.picmg.org CompactPCI PlusIO CompactPCI PlusIO Specification, PICMG 2.30 R1.0, November 11, 2009 www.picmg.org CompactPCI Serial Under developement www.picmg.org DisplayPort VESA DisplayPort Standard Version 1.1 March 19, 2007 www.vesa.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PC1-GROOVE Features Feature Summary Feature Summary PC1-GROOVE Form Factor Single size CompactPCI® style Eurocard (160x100mm2), front panel width 4HP (20.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Feature Summary PC1-GROOVE USB < < < < < < Ethernet < < < SATA < < < < < All ports over-current protected, data transfer rate of up to 480Mbps, conforming to USB2.0 2 x USB type A connector (front panel) 4 x USB ports J2/P2 PlusIO 2 x USB ports via J-EXP expansion interface option (in use by several mezzanine side boards) 4 x USB ports via J-HSE (e.g.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Feature Summary PC1-GROOVE J1 CompactPCI® < < < < PCH QM57 integrated 32-bit PCI bridge, 33MHz 133MBps CompactPCI master Additional PCI arbiter in PLD for fully figured 8-slot CompactPCI backplane +5V V(I/O) default configuration (PCI pull-up resistors 1k - blue coding key on J1) +3.3V V(I/O) on request (PCI pull-up resistors 2.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Performance Rating Measured with PCMark2005 under Windows® XP, 2 x 2GB DDR3 1066 Board Processor CPU/MEM Score PC1-6-GROOVE i7-610E TBD PC1-4-GROOVE i7-620LE TBD PC1-2-GROOVE i7-620UE TBD Table items are subject to technical changes PC1-GROOVE (Option DisplayPort) and C41-CFast Module © EKF -10- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board 2 Cores - 4 Threads Sheet 3 PCIe Switch PCIe 0.1 - 0.4 DDR3 Low Power 800/1067 Dual Channel CPU Core™ i7 i7-610E 2.53/3.2GHz SV i7-620LE 2.0/2.8GHz LV i7-660UE 1.33/2.4GHz ULV i7-620UE 1.06/2.13GHz ULV EKF Document DDR3 Soldered Arrandale+ECC DDR3 SO-DIMM Block Diagram PC1-GROOVE #1167 FDI DMI2 Sheet 2 PCH Intel® Low Power Platform Calpella+ECC Simplified Block Diagram PC1-GROOVE Sheet 1 - CPU & RAM © EKF -11- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Sheet 1 CPU FDI DMI2 Front Panel Stuffing Alternates either DisplayPort or VGA Sheet 3 J-SDVO2 Sheet 3 USB PCI Sheet 4 J1 CRT DDPC Sheet 3 J-DDP SDVO/DDPB GPIO DDPD HD Audio PCH USB SMBUS Sheet 3 J-EXP Front Panel I/O J-EXP J-HSE USB Sheet 4 J2 QM57 IbexPeak-M SATA LPC SATA Hanksville GbE 1 GbE 2 82577 LM 82574 IT PCIe 1.6 SPI PCIe 1.7 rfu PCIe 1.3 PCIe 1.4 rfu PCIe 1.8 PCIe 1.1 - 1.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Simplified Block Diagram PC1-GROOVE Sheet 3 - Mezzanine Connectors PCIe 1.5 Sheet 2 PCH PCIe SATA SATA SATA Sheet 2 PCH SDVO Sheet 2 PCH DDPC J-SDVO2 USB J-HSE JMB362 Opt. Mezz. Exp. Board USB LPC Sheet 2 PCH HD Audio Hanksville SMBUS PCIe 0.1 - 0.4 PCIe PCIe 2.1 - 2.4 Gen2 Switch J-PCIE Sheet 1 CPU J-EXP GPIO PEX 8614 12 x 12 PCIe 3.1 - 3.4 Sheet 4 J2 © EKF -13- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Hartwell PCIe 1.1 - 1.2 GbE SATA Hanksville USB Sheet 3 PCIe Switch PlusIO J2 Sheet 2 PCH 82574 82574 IT IT PICMG 2.30 PlusIO RIO or CPCI Serial Backplane PCIe 3.1 - 3.4 CPCI PCI J1 Sheet 2 PCH CompactPCI Backplane 32-Bit Simplified Block Diagram PC1-GROOVE Sheet 4 - Backplane Connectors © EKF -14- ekf.
© EKF Dual GbE DP VGA USB USB SODIMM DDR3 -15- Memory Down J-EXP J-SDVO2 J-PCIE SV/LV/ULV Intel® Core™ i7 PC1-GROOVE • CompactPCI® PlusIO • © EKF • ekf.com ekf.com © EKF J-HSE J1 UHM J2 User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Top View Component Assembly ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PC1-GROOVE Top View PC1-GROOVE Bottom View © EKF -16- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Strapping Headers DSW1 Switches to configurate PCIe link width P-FPH Jumper to generate Power Button Events (Front Panel Handle Switch) P-ISP PLD Programming Connector, not stuffed P-GP Jumper to reset UEFI BIOS Setup to EKF Factory Defaults P-MFG Jumper to enter Manufacturing Mode, not stuffed P-RTC Jumper to reset RTC Core of PCH, not stuffed Connectors & Sockets J1/J2 CompactPCI Bus 32-bit, 33MHz, PlusIO J-EXPT J-EXPB 1) Expansion I
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Microprocessor The PC1-GROOVE is designed for use with Intel® CoreTM i7 processors (code name Arrandale). These processors integrate the graphics and memory controller within one chip that up to now were located in an external part of the chipset (GMCH). As a result the platform core is reduced from the known three chip solution (CPU, GMCH, ICH) to only two devices (CPU, PCH).
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Thermal Considerations In order to avoid malfunctioning of the PC1-GROOVE, take care of appropriate cooling of the processor and system, e.g. by a cooling fan suitable to the maximum power consumption of the CPU chip actually in use. The processor contains digital thermal sensors (DTS) that are readable via special CPU registers. DTS allows to get the temperatures of each CPU core separately.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Performance Derating Core®i7-610E/-660UE Airflow=2.5m/s 120 100 80 i7-610E, 1.2GHz 60 i7-610E, 2.53GHz i7-660UE, 1.33GHz 40 20 0 60 65 70 75 80 85 90 Temp °C Main Memory The PC1-GROOVE features two channels of DDR3 SDRAMs. One channel is realized with 8 memory devices soldered to the board (Memory Down) and delivers a capacity of up to 4GB with a clock frequency of 1066MHz (PC3-8500).
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Graphics Subsystem The graphics subsystem is part of the Intel CoreTM i7 processor and the PCH QM57. While the graphics controller is located within the CoreTM i7 processor, the different interfaces like DisplayPort, SDVO and VGA are moved to the PCH. The PC1-GROOVE offers one DisplayPort interface in the front panel. Adapters to convert DisplayPort to any other popular interface standard are available.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Serial ATA Interface (SATA) The PC1-GROOVE provides eight serial ATA (SATA) ports each capable of transferring 3Gbps (300MByte/s). Four of the six ports integrated within the PCH are routed to the CompactPCI PlusIO interface (J2/P2 connector). The remainder SATA channels of the PCH and two further ports coming from an additional controller (JMicron JMB362) are fed to the high speed expansion connector J-HSE.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Universal Serial Bus (USB) The PC1-GROOVE is provided with twelve USB ports, all of them are USB 2.0 capable. Two USB interfaces are routed to front panel connectors, two ports are feed to the expansion board interface connectors J-EXP, four to the high speed expansion connector J-HSE, and four ports are available across the J2/P2 connector for PlusIO. The front panel USB connectors can source up to 0.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Reset The PC1-GROOVE is provided with several supervisor circuits to monitor supply rails like the CPU core voltage, 1.5V, 3.3V or 5V. This circuitry is responsible also to generate a clean power-on reset signal. To force a manual board reset the PC1-GROOVE offers a small tactile switch within the front panel. This push-button is indent mounted and requires a tool, e.g. a pen to be pressed, preventing from being inadvertently activated.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board © EKF -25- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board <4s 5 2 © EKF © EKF • ekf.com 1 6 3 7 4 8 -26- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Watchdog An important reliability feature is the watchdog function, which is programmable by software. The behaviour of the watchdog is defined within the PLD, which activates/deactivates the watchdog and controls its time-out period. The time-out delay is adjustable in the steps 2, 10, 50 and 255 seconds. After alerting the WD and programming the time-out value, the related software (e.g. application program) must trigger the watchdog periodically.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PG (Power Good) LED The PC1-GROOVE offers a LED labelled PG located within the front panel.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board EB (Ethernet Backplane) LED To monitor the link status and activity on both Ethernet ports attached to the backplane via the J2/P2 connector (PlusIO) a single bicoloured LED is provided in the front panel. The states are decoded as follows: 1_ETH 2_ETH LED EB no link no link OFF link no link Green no link link Yellow link link Green/Yellow Blinking of the LED EB in the appropriate colour means that there is activity on the port.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Mezzanine Side Board Options The PC1-GROOVE is provided with several stacking connectors for attachment of a mezzanine expansion module (aka side board), suitable for a variety of readily available mezzanine cards (please refer to www.ekf.com/c/ccpu/mezz_ovw.pdf for a more comprehensive overview). EKF furthermore offers custom specific development of side boads (please contact sales@ekf.de).
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Low Profile Storage Module Area PC1-GROOVE with C47-MSATA RAID Mezzanine Module © EKF -31- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PC1-GROOVE w. C41-CFAST Mezzanine Module PC1-GROOVE w. C41-CFAST Mezzanine Module © EKF -32- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PC1-GROOVE w. C42-SATA Mezzanine Module Related Documents Mezzanine Modules and Side Cards © EKF C40 ... C45 Series Mezzanine Storage Modules www.ekf.com/c/ccpu/c4x_mezz_ovw.pdf Mezzanine Modules Overview www.ekf.com/c/ccpu/mezz_ovw.pdf The EKF Mezzanine Module Concept www.ekf.com/c/ccpu/cpci_mezzanine_evolution.pdf -33- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board C41-CFAST Mezzanine Module C42-SATA Mezzanine Module © EKF -34- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board C43-SATA Mezzanine Module PC1-GROOVE • C44-SATA Side Card © EKF -35- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board C45-SATA Side Card PC1-GROOVE • C45-SATA (Removable SSD) © EKF -36- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PC1-GROOVE • C45-SATA (Internal SSD) Custom Specific Mezzanine Module Design © EKF -37- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board CompactPCI® PlusIO Option The PICMG® 2.30 CompactPCI® PlusIO specification defines the usage of rear I/O pins of the 32-bit CompactPCI® system slot for high-speed serial signals. For these high-speed signals a new J2 connector (3M UHM type) has been introduced, which is compatible to the classic 2.0mm hard metric connector J2, and in addition is suitable for high speed differential signals.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board The PC1-GROOVE can be used in any system with a CompactPCI® PlusIO backplane according to the PICMG® 2.30 specification. Hybrid backplanes allow the configuration of systems with CompactPCI® Serial slots in addition to classic CompactPCI® boards. CompactPCI 32-Bit Peripheral Slots PICMG® 2.30 PlusIO Removable Power Supply CompactPCI® PlusIO & CompactPCI® Serial Hybrid Backplane CPCIS.0 Peripheral Slots © EKF • ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PC1-GROOVE as System Controller in a Hybrid System Sample Hybrid CompactPCI® & CompactPCI® Serial Backplanes © EKF -40- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Sample Hybrid System Rack Sample Hybrid System Rack © EKF -41- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board As an alternate, the PC1-GROOVE can be combined with a CompactPCI® PlusIO rear I/O transition module, such as the PR1-RIO, which is provided with I/O connectors (on-board and back-panel) for all high speed signals. PR1-RIO • Rear I/O Transition Module PR1-RIO w. on-Board USB Stick © EKF -42- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PR1-RIO w. on-Board PE Cable Connectors © EKF -43- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PC1-GROOVE & PR1-RIO PC1-GROOVE & PR1-RIO © EKF -44- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Installing and Replacing Components Before You Begin Warnings The procedures in this chapter assume familiarity with the general terminology associated with industrial electronics and with safety practices and regulatory compliance required for using and modifying electronic equipment. Disconnect the system from its power source and from any telecommunication links, networks or modems before performing any of the procedures described in this chapter.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Installing the Board Warning This procedure should be done only by qualified technical personnel. Disconnect the system from its power source before doing the procedures described here. Failure to disconnect power, or telecommunication links before you open the system or perform any procedures can result in personal injury or equipment damage.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Removing the Board Warning This procedure should be done only by qualified technical personnel. Disconnect the system from its power source before doing the procedures described here. Failure to disconnect power, or telecommunication links before you open the system or perform any procedures can result in personal injury or equipment damage.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board EMC Recommendations In order to comply with the CE regulations for EMC, it is mandatory to observe the following rules: C The chassis or rack including other boards in use must comply entirely with CE C Close all board slots not in use with a blind front panel C Front panels must be fastened by built-in screws C Cover any unused front panel mounted connector with a shielding cap C External communications cable assemblies must be shielded (sh
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Installing or Replacing the Memory Module Note: If you decide to replace the memory, observe the precautions in 'Before You Begin' By default, the PC1-GROOVE is delivered with onboard memory only, the SODIMM DDR3 SDRAM socket is empty. To expand the memory a DDR3 SDRAM SODIMM module may be inserted in the socket SODM1.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Technical Reference Local PCI Devices The following table shows the on-board PCI devices and their location within the PCI configuration space. These devices consist of some locale controllers and several devices within the Intel 5 series express chip set.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Local SMB Devices The PC1-GROOVE contains a few devices that are reachable via the System Management Bus (SMBus). These are the clock generation chip, the SPD EEPROMs for the onboard memory channel or located on the SODIMM memory module, a general purpose serial EEPROM and a supply voltage and temperature controlling device in particular.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board GPIO Usage GPIO Usage PCH PC1-GROOVE GPIO Usage PCH QM57 GPIO Type Tol. Function Description GPIO 0 I 3.3V THRM_ALERT# Monitoring of processor PROCHOT# GPIO 1 I 3.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PC1-GROOVE GPIO Usage PCH QM57 GPIO Type Tol. Function Description GPIO 34 O 3.3V STP_PCI# Multiplexed with chipset internal function GPIO 35-37 I 3.3V HWREV GPIO 38 O 3.3V SLOAD Serial GPIO Bus LOAD (J2: SATA_SL) GPIO 39 O 3.3V SDATAOUT Serial GPIO Bus DATAOUT (J2: SATA_SC) GPIO 40 I 3.3V USB_OC1# USB Front Panel Lower Port Overcurrent Detect GPIO 41 O 3.3V ENABLE_NC3 Enable Ethernet Controller NC3 GPIO 42 O 3.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Configuration Jumpers Configuration Switches PCI Express Link Width (DSW1) 160.15.02.0 © EKF • ekf.com The link width of the PCI Express interfaces attached to the PlusIO interface J2/P2 and the local expansion connector P-PCIE is configurable by two DIP switches (DSW1) located on the backside of the PC1-GROOVE. Note that changes in PCIe link width configuration are honoured by the PC1-GROOVE not before a system reset was performed.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Loading UEFI BIOS Setup Defaults (P-GP) The jumper P-GP is used to reset the UEFI BIOS configuration settings to a default state. The UEFI BIOS on PC1-GROOVE stores most of its settings in an area within the BIOS flash, e.g. the actual boot devices. Using the jumper P-GP is only necessary, if it is not possible to enter the setup of the BIOS. To reset the settings mount a jumper on P-GP and perform a system reset.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Reset Jumper PCH RTC Core (P-RTC) The jumper P-RTC is used to reset the battery backed core of the PCH. This effects some registers within the PCHs RTC core that are important before the CPU starts its work after a system reset. Note that P-RTC will neither set UEFI BIOS Setup to EKF Factory Defaults nor resets the real time clock. To reset the RTC core the board must be removed from the system rack. Short-circuit the pins of P-RTC for about 1 sec.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Connectors Caution Some of the internal connectors provide operating voltage (3.3V and 5V) to devices inside the system chassis, such as internal peripherals. Not all of these connectors are overcurrent protected. Do not use these internal connectors for powering devices external to the computer chassis.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board DisplayPort Monitor Connector J-DP EKF Part # 270.60.20.0 • © EKF DisplayPort J-DP 1) 20 20 PWR 1) 19 RETURN (GND) 18 HPD 17 AUX_CH(N) 16 GND 15 AUX_CH(P) 14 CONFIG2 (GND) 13 CONFIG1 12 LANE3(N) 11 GND 10 LANE3(P) 9 LANE2(N) 8 GND 7 LANE2(P) 6 LANE1(N) 5 GND 4 LANE1(P) 3 LANE0(N) 2 GND 1 LANE0(P) +3.3V protected by a PolySwitch Fuse 0.5A. This voltage is switched on in S0 state only.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Plug Style DP to DVI Adapter Cable Adapter DP to DVI Cable Adapter DP to VGA © EKF -59- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Specified by the VESA DisplayPort connector standard is a dedicated power pin 20 (+3.3V 0.5A). Both the GPU (source side) and a DP monitor (sink side) must provide power via this pin. A VESA specified DisplayPort cable however must not connect the pins 20 of both cable ends, in order to avoid a back driving conflict. Unfortunately there are cable assemblies available with pin 20 passed through, with unpredictable results on the system behaviour.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Video Monitor Connector J-VGA As an option, the PC1-GROOVE can be equipped with a legacy VGA connector (High-Density D-Sub 15-position female connector). The connector J-VGA replaces the J-DP receptacle, and the digital DisplayPort video interface therefore is not available concurrently with this option.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board USB Connectors USB Ports 1/2 (J-USB1/J-USB2) 1 4 #270.20.04.2 ©EKF • ekf.com 1) 1 POW 1) 2 USB DATA (N) 3 USB DATA (P) 4 GND +5V protected by an Electronic Fuse 0.5A. Power rail may be switched off by software independently for each port. Ethernet Connectors Gigabit Ethernet Ports 1/2 (J-ETH, RJ45) Port 1 1 1 270.02.08.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Internal Connectors Expansion Interface Header J-EXP J-EXPT (J-EXPB optinal) 2 © EKF 276.53.040.01 ekf.com 1 40 1.27mm Socket 1) 2) 3) 4) GND 1 2 +3.3V 1) PCI_CLK (33MHz) 3 4 PLTRST# LPC_AD0 5 6 LPC_AD1 LPC_AD2 7 8 LPC_AD3 LPC_FRM# 9 10 LPC_DRQ# GND 11 12 +3.3V 1) SERIRQ 13 14 EXP_PME# EXP_SMI# 15 16 SIO_CLK (14.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board High Speed Expansion Connector J-HSE High Speed Expansion J-HSE a1 b1 s10 © EKF • 275.90.08.068.01 • ekf.com 1.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PCI Express Expansion Header J-PCIE J-PCIE 1 2 290.1.040.080 © EKF ekf.com PCI Express x 4 Top View on CPU Carrier Board High Speed Socket Connector 1) GND 1 2 GND +5V 1) 3 4 +3.3V 1) +5V 1) 5 6 +3.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board SDVO2 Expansion Header J-SDVO2 J-SDVO2 1 1 2 GND SDVO_RED+ 3 4 SDVO_CLK+ SDVO_RED- 5 6 SDVO_CLK- GND 7 8 GND SDVO_GREEN+ 9 10 SDVO_INT+ SDVO_GREEN- 11 12 SDVO_INT- GND 13 14 GND SDVO_BLUE+ 15 16 SDVO_CTR_CLK SDVO_BLUE- 17 18 SDVO_CTR_DATA GND 19 20 GND GND 21 22 GND DP_LANE0(P) 23 24 DP_LANE3(P) DP_LANE0(N) 25 26 DP_LANE3(N) GND 27 28 GND DP_LANE1(P) 29 30 DP_AUX(P) DP_LANE1(N) 31 32 DP
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Front Panel Handle Microswitch Header P-FPH The jumper P-FPH is used to perform power button events. By default P-FPH is connected with a short cable to a micro switch located within the front panel handle. The switch performs power button events by short-circuiting the pins 1 and 3 of P-FPH. 1 © EKF 276.02.003.11 ekf.com 1=PWRBTN# 2=NC 3=GND P-FPH © EKF -67- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PLD Programming Header P-ISP 240.1.08.ISP © EKF 1 ekf.com 1=3.3V 5=KEY 2=TDO 6=TMS 3=TDI 7=GND 4=NC 8=TCK P-ISP Note: P-ISP is not stuffed. Its footprint is situated at the bottom side of the board.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board CompactPCI J1 J1 A B C D E 25 5V REQ64# 2) ENUM# 1) 3.3V 5V 24 AD1 5V V(I/O) AD0 ACK64# 2) 23 3.3V AD4 AD3 5V AD2 22 AD7 GND 3.3V AD6 AD5 21 3.3V AD9 AD8 GND/M66EN 3) C/BE0# 20 AD12 GND V(I/O) AD11 AD10 19 3.3V AD15 AD14 GND AD13 18 SERR# 1) GND 3.3V PAR C/BE1# 17 3.3V IPMB SCL 4) IPMB SDA 4) GND PERR# 1) 16 DEVSEL# 1) GND V(I/O) STOP# 1) LOCK# 1) 15 3.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board CompactPCI J2 (PlusIO) This connector is a high speed UHM connector, suitable for Gigabit Serial I/O Refer also to PICMG® 2.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board f e d c b a 25 f e d c b a 1 © EKF 250.0522.10.10 ekf.com J2 2mm Hard Metric Connector © EKF 250.0525.10.01 ekf.com J1 2mm Hard Metric Connector 22 1 J2 UHM (Top) J1 (Bottom) © EKF -71- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Appendix Mechanical Drawings The following drawing shows the positions of mounting holes and expansion connectors on the PC1-GROOVE. 100.00 94.50 93.50 7.00 26.5 21.5 64.07 57.50 J-HSE 102.10 140.07 113.40 160.00 Expansion Module J-EXP PCIe J-SDVO2 PCIe J-PCIE PC1-GROOVE © EKF • ekf.com 5.50 © EKF -72- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Small Industrial Systems Small Industrial Systems © EKF -73- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Rugged Industrial Systerms Rugged Industrial Systems © EKF -74- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Full Size Industrial System Custom Specific System © EKF -75- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board C40-SCFA CompactFlash Module C41-CFAST CFast Module © EKF -76- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board C42-SATA 1.8-Inch Micro SATA Module C43-SATA Internal SATA Connector Module © EKF -77- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board C47-MSATA Dual mSATA SSD Module Custom Specific Front Panel Solutions Available © EKF -78- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PC1-GROOVE © EKF -79- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PC1-GROOVE with C47-MSATA RAID Storage Mezzanine Module © EKF -80- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PC1-GROOVE • PCS-BALLET Side Card (8HP Assembly) PC1-GROOVE • PCS-BALLET Side Card (12HP Assembly) © EKF -81- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PC1-GROOVE w. PCS-BALLET Side Card & C42-SATA Mezzanine © EKF -82- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board PC1-GROOVE w. PCS-BALLET Side Card & C47-MSATA Mezzanine © EKF -83- ekf.
User Guide • PC1-GROOVE • CoreTM i7 CompactPCI® CPU Board Industrial Computers Made in Germany boards. EKF Elektronik GmbH Philipp-Reis-Str. 4 59065 HAMM Germany systems. solutions. Phone +49 (0)2381/6890-0 Fax +49 (0)2381/6890-90 Internet www.ekf.com E-Mail sales@ekf.
