User guide

CG2-SHANTY • CompactPCI GPS Receiver/Clock
- 25 -
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany
Tel. [phone] • Fax. [phone] • E-Mail [e-mail] • Internet www.ekf.com
Connector SP2
The illustration below shows the pin assignment of the connector SP2 (front view to the
connector). Signal directions are seen from the view of the CG2-SHANTY, e.g. RXD (SP2, pin 2)
is an input to the CG2-SHANTY.
Male D-Sub 9 Connector (PC compatible)
SP2 (RS-232E)
1DCD
DSR 6
2RXD
RTS 7
3TXD
CTS 8
4DTR
RI 9
5GND
The signal RXD (typically data from external DGPS receiver) can be observed from an indicator
LED mounted in the front panel of the CG2-SHANTY.
DCD
RTS
RxD
TxD
DTR
DSR
CTS
GND
1
5
6
9
RI
CG2-SHANTY
SP2 (RS-232E)
male D-SUB