User guide

CG2-SHANTY • CompactPCI GPS Receiver/Clock
- 14 -
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany
Tel. [phone] • Fax. [phone] • E-Mail [e-mail] • Internet www.ekf.com
JUTC1
1 2 3
1 2 3
1 2 3
removed
set 1-2
set 2-3
not connected
10kHz to UART
1Hz to UART
JUTC3
1 2 3
1 2 3
1 2
3
removed
set 1-2
set 2-3
not connected
10kHz to INTP
1Hz to INTP
JMP_COM
removed
set Transceiver enabled
Transceiver disabled
C The CG2-SHANTY can be used to synchronize external events with the UTC (Universal
Time Coordinated). Two single row 3-pin headers (JUTC1 & JUTC3) are provided optional
to route the time signal to the UART controller or directly to the INTP pin on the
CompactPCI backplane (J1 D4).
(optional)
(optional)
C Optional, one single row 2-pin header (JMP_COM) is provided to enable/disable the
onboard RS232 transceiver.
(optional)