User guide

User Guide CC3-CAJUN • Low Power CompactPCI CPU
- 6 -
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 Hamm • Germany
Tel. [phone] • Fax. [phone] • [e-mail] • www.ekf.com
CC3-CAJUN Features
Feature Summary
Feature Summary CC3-CAJUN
Form Factor Single size CompactPCI style Eurocard (160x100mm
2
), front panel width 4HP (20.3mm)
Processor Designed for Intel® ULV Celeron® and LV Pentium® III Micro FC-BGA processors (Tualatin 0.13µ
generation), maximum junction temperature 100°C, processor thermal design power classification:
< CC3-1: 400MHz ULV Celeron, 0.95V, 100MHz FSB, 256KB L2 cache, 3.4W typical 4.2W max.
< CC3-2: 650MHz ULV Celeron, 1.10V, 100MHz FSB, 256KB L2 cache, 7.0W typical 8.3W max.
< CC3-3: 800MHz LV Pentium 3, 1.15V, 133MHz FSB, 512KB L2 cache, 11.2W max.
< CC3-4: 933MHz LV Pentium 3, 1.15V, 133MHz FSB, 512KB L2 cache, 12.2W max.
Chipset Intel® i815 chipset consisting of:
< 82815 Graphics/Memory Controller Hub (GMCH)
< 82801 I/O Controller Hub (ICH2)
< 82802 compatible Firmware Hub (FWH)
< 8761 LPC Super I/O
Memory < 144-pin SO-DIMM socket
< Support for up to 512MB, PC133, non ECC, unbuffered SDRAM
< Support for serial presence detect (SPD) SO-DIMMs
Video < Both analog monitor and digital flat-panel display support by DVI-I connector (front panel), up
to 1280x1024 pixel 16M colors 85Hz refresh rate, incorporates PanelLink Digital technology
(Silicon Image)
< Option: D-SUB (female HD15) connector available, replaces DVI-I connector
USB Ports over-current protected, data transfer rate of up to 12Mbps, conforming to USB1.1
< USB port 1: Type A connector (front panel)
< USB port 2: J2/P2 Rear I/O option
Ethernet 10/100Mbps Fast Ethernet controller, 82551ER chip, RJ45 front panel connector
Serial Port
COM1
< On-board RS-232E transceiver, RJ45 front panel connector (adapter RJ45 to D-Sub available),
transceiver can be disabled if rear I/O COM port option is preferred
< J2/P2 Rear I/O option (TTL voltage level)
Legacy I/O < LPC Super-I/O interface connector, CC6-ACID mezzanine companion board available for top
(right) or bottom (left) mounting
< J2/P2 Rear I/O option: Keyboard, Mouse, COM1 (TTL voltage level)
IDE/ATA < Ultra ATA/66 40-pin connector (primary IDE)
< CompactFlash socket for CFA ATA cards (secondary IDE)
< J2/P2 Rear I/O option: Primary IDE
CompactPCI 32-bit, 33.3MHz, PCI bridge chip PLX 6150, 133MByte/s CPCI master
J2/P2 Rear I/O
Option
< Primary IDE
< USB port 2
< PS/2 keyboard, mouse
< COM1 (TTL voltage level)
< Rear I/O transition module CCY-RIO available
PXI Support TRIG0, TRIG1, TRIG6, TRIG7 (can be alternatively used as GPIO)
BIOS < Phoenix BIOS with EKF embedded systems enhancements
< 8Mbit Flash memory
< Updates available from website ekf.com
Drivers
(Major OS)
< Intel graphics drivers
< Intel networking drivers
Power
Requirements
< CC3-1-CAJUN: +5V±0.25V 1.3A max.+3.3V±0.1V 1.1A max.
<
CC3-2-CAJUN: +5V±0.25V 1.9A max.+3.3V±0.1V 1.3A max.