User guide

User Guide CC3-CAJUN • Low Power CompactPCI CPU
- 12 -
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 Hamm • Germany
Tel. [phone] • Fax. [phone] • [e-mail] • www.ekf.com
Expansion Modules CC6-ACID & CC0-CHILLOUT
Available optionally as a mezzanine
companion board to the CC3-CAJUN, the
CC6-ACID is provided with several legacy I/O
ports in addition. This module can be
mounted either to the bottom side or on top
of the CC3-CAJUN and communicates across
the LPC (Low Pin Count) interface.
The CC6-ACID could be useful if the classical
interfaces, e.g. serial and parallel ports, are
required by a given application.
In addition, the CC6-ACID can be delivered
with an on-board 2.5-inch Ultra ATA hard
disk drive, resulting in a very compact
system. Both COM connectors, LPT, and PS/2
mouse and keyboard are situated at the CC6-
ACID front panel (4HP and 8HP versions
available).
The CC0-CHILLOUT is similar to the CC6-
ACID, but designated for use together with a
rear I/O transition module (CCZ-RIO).
CompactPCI J1
LPC
47B272
Super I/O
(Low Pin Count)
Block Diagram
CC6-ACID
usage
optional
IDE
IDE
40
44
Optional On-Board
Ultra ATA/66
2.5" Hard Disk Drive
+5V
+3.3V
LPC
FDD
COMCOM
LPT
Front Panel Connectors
CC2
CC3
CC2
CC3
FAN1..4 P6..P9
optional
MIDI/Gameport P10
optional
K
Bus
Switch
EN
JSEL
JM
© EKF
ekf.com
external
Floppy-Disk
LPT/Mouse
CC6-1 only
(splitter cable
required for
CC6-3)
CC6-1
CC6
-3