Technical information

Technical Information CC0-CHILLOUT • LPC Super-I/O
- 6 -
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany
Tel. [phone] • Fax. [phone] • E-Mail [e-mail] • Internet www.ekf.de
Short Description
Available as a companion board to the CC2-
TANGO, CC5-RAVE, CC7-JAZZ and the CC8-
BLUES CPU cards, the CC0-CHILLOUT is
provided with common legacy I/O ports.
Interconnection between the CC0 I/O
module and the CPU carrier board is
achieved by the LPC (Low Pin Count)
interface.
As an option, the CC0-CHILLOUT is available
with a rugged on-board 2.5-inch hard disk
drive.
The CC0-CHILLOUT has been designed for
rear I/O and therefore requires a non-bussed
single-slot P1/P2 backplane in addition to the
CompactPCI bus. However, if front panel I/O
is preferred, the CC6-ACID should be used
instead.
Typically, the CC0-CHILLOUT shares an 8HP
front panel together with the associated CPU
carrier board. Therefore the chosen CPU
board and the CC0 should be ordered as an
integral unit.