Technical information
Technical Information CC0-CHILLOUT • LPC Super-I/O
- 5 -
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany
Tel. +49 (0)2381/6890-0 • Fax. +49 (0)2381/6890-90 • E-Mail info@ekf.de • Internet www.ekf.de
CC0-CHILLOUT Features
Feature Summary
Form Factor Single size Eurocard (160x100mm
2
), front panel width 4HP (20.3mm)
LPC Super-I/O
Chip
LPC47B27x, parallel port, 2 serial ports, floppy drive controller port,
keyboard controller & mouse port, infrared port, MIDI/gameport, fan
control ports, GPIOs, serial IRQs
Front Panel
Connectors
No front panel connectors are provided on the CC0-CHILLOUT, use the
CC6-ACID instead if front panel I/O is required
On-Board
Connectors
1
LPC Interface, IDE/ATA 40-pin header 2.54mm, IDE/ATA 44-pin header
2.00mm, floppy disk header 34-pin 2.54mm, floppy disk 26-pos. ZIF
socket, floppy disk power, 2 x fan heatsink header (pulse width
modulation), 2 x fan heatsink header (tacho generator), MIDI/gameport
header
Rear I/O
Connectors
J1: IDE, PS/2 KB/MS, RJ45 Ethernet
2
, Video analog/digital
2
J2: Serial1/COM1, Serial2/COM2, LPT, floppy disk, USB
2
, GPIO, IRDA
On-Board
Functions
Speaker, IDE activity, optional LEDs: GPIO21, GPIO22, GPIO43, GPIO60,
GPIO61, 3.3V, 5V, 12V
Hard Disk
Option
Hard disk drive 2.5-inch optional on-board
MTBF 0.185 * 10
6
h
1
Not all of these connectors may be present on your actual CC0-CHILLOUT board.
Assembly of these connectors is highly custom specific. Discuss your needs with EKF
before ordering.
2
Available as an option only, which requires also the CPU carrier board to be assembled
custom specific, for passing the related signals to the CC0-CHILLOUT by board-to-board
stackers.
Subject to changes