Technical information

Technical Information CC0-CHILLOUT • LPC Super-I/O
- 22 -
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany
Tel. [phone] • Fax. [phone] • E-Mail [e-mail] • Internet www.ekf.de
1
A
MP 171
8
2
6
-4
Power Connector P5
P5
1 +5V/1.25A
2GND
3GND
4 +12V/1.25A
The initial purpose of the optional connector P5 was to deliver +5V power to an attached
floppy disk drive wired to P4. A suitable cable assembly matching the AMP 171826-4 would be
required. Alternatively, P5 can be used to pass +5V and +12V redundantly (in addition to the
LPC connector P1) to the CC0-CHILLOUT, which can improve the power distribution when an
on-board hard disk drive is in use (especially if a pair of drives is connected to P3). The current
across P5 is limited by resettable fuses.