Technical information

Technical Information CC0-CHILLOUT • LPC Super-I/O
- 20 -
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany
Tel. [phone] • Fax. [phone] • E-Mail [e-mail] • Internet www.ekf.de
12
2.00mm
43 44
IDE/ATA Connector P3
P3 (2.00mm Header)
reset# 1 2 GND
d07 3 4 d08
d06 5 6 d09
d05 7 8 d10
d04 9 10 d11
d03 11 12 d12
d02 13 14 d13
d01 15 16 d14
d00 17 18 d15
GND 19 20 KEY
dmarq 21 22 GND
iow# 23 24 GND
ior# 25 26 GND
iordy 27 28 NC
dmack# 29 30 GND
intrq 31 32 NC
a1 33 34 cblid#
a0 35 36 a2
cs1# 37 38 cs3#
act# 39 40 GND
drvpwr 41 42 drvpwr
GND 43 44 NC
P3 is provided for a 2.5-" on-board hard disk drive. Either usage of the IDE connector P3, or rear
I/O IDE across connector J1 require the IDE bus switches enabled (jumper J-IDE2 set). No stubs
are allowed on a IDE cable assembly, i.e. exclusively use either P2 (J-IDE2 removed), or P3 (J-IDE2
set), or rear I/O IDE (J-IDE2 set).