Technical information

Technical Information CC0-CHILLOUT • LPC Super-I/O
- 19 -
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany
Tel. [phone] • Fax. [phone] • E-Mail [e-mail] • Internet www.ekf.de
21
2.54mm
40
39
Key
Optional On-Board
Ultra ATA 2.5-"
Hard Disk Drive
Rear I/O J1
Primary IDE P2 Primary IDE P3
40 44
CC2
CC5
CC7
Bus
Switch
EN
J-IDE2
IDE1
IDE2
IDE2
IDE/ATA Connector P2
P2 (2.54mm Dual Row Pin Header)
reset# 1 2 GND
d07 3 4 d08
d06 5 6 d09
d05 7 8 d10
d04 9 10 d11
d03 11 12 d12
d02 13 14 d13
d01 15 16 d14
d00 17 18 d15
GND 19 20 KEY
dmarq 21 22 GND
iow# 23 24 GND
ior# 25 26 GND
iordy 27 28
dmack# 29 30 GND
intrq 31 32
a1 33 34 cblid#
a0 35 36 a2
cs1# 37 38 cs3#
act# 39 40 GND
P2 is provided for attachment of classic IDE devices (e.g. 3.5-" hard disk drive, DVD-ROM). Usage
of the IDE connector P2 requires the IDE bus switches disabled (jumper J-IDE2 removed). No
stubs are allowed on an IDE cable assembly, i.e. use either P2 (J-IDE2 removed), or P3 (J-IDE2
set), or rear I/O IDE (J-IDE2 set).