Technical information

Technical Information CC0-CHILLOUT • LPC Super-I/O
- 16 -
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany
Tel. [phone] • Fax. [phone] • E-Mail [e-mail] • Internet www.ekf.de
Technical Reference - Connectors
Caution
Some of the connectors provide operating voltage (e.g. 5V and 12V) to devices inside the
system chassis, such as fans and internal peripherals. Not all of these connectors are overcurrent
protected. Do not use these connectors for powering devices external to the computer chassis.
A fault in the load presented by the external devices could cause damage to the board, the
interconnecting cable and the external devices themselves.
Please Note
The CC0-CHILLOUT transition module may be equipped with several on-board connectors for
system internal usage. Not all of these connectors may be present on a particular board. Be sure
to specify your individual needs when ordering the CC0 board. Characteristic features and the
pin assignments of each connector are described on the following pages (connector designation
in alphabetical order).