Technical information

Technical Information CC0-CHILLOUT • LPC Super-I/O
- 15 -
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany
Tel. [phone] • Fax. [phone] • E-Mail [e-mail] • Internet www.ekf.de
EMC Recommendations
In order to comply with the CE regulations for EMC, it is mandatory to observe the following
rules:
C The chassis or rack including other boards in use must comply entirely with CE
C Close all board slots not in use with a blind front panel
C Front panels must be fastened by built-in screws
C Cover any unused front panel mounted connector with a shielding cap
C External communications cable assemblies must be shielded (shield connected only at
one end of the cable)
C Use ferrite beads for cabling wherever appropriate
C Some connectors may require additional isolating parts (e.g. 10Base-2 BNC T-connector)
Reccomended Accessories
Blind CPCI Front
Panels
EKF Elektronik
Widths currently available (1HP=5.08mm):
with handle 4HP/8HP
without handle 2HP/4HP/8HP/10HP/12HP
Ferrit Bead Filters ARP Datacom,
63115 Dietzenbach
Ordering No.
102 820 (cable diameter 6.5mm)
102 821 (cable diameter 10.0mm)
102 822 (cable diameter 13.0mm)
Isolating Elements ARP Datacom,
63115 Dietzenbach
Ordering No. 182 068
(Cheapernet T-connector)
Metal Shielding
Caps
Conec-Polytronic,
59557 Lippstadt
Ordering No.
CDFA 09 165 X 13129 X (DB9)
CDSFA 15 165 X 12979 X (DB15)
CDSFA 25 165 X 12989 X (DB25)