User guide

User Guide CC8-BLUES • Multi-Processing CompactPCI CPU
- 36 -
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 HAMM • Germany
Tel. [phone] • Fax. [phone] • E-Mail [e-mail] • Internet http://www.ekf.de
Removing the Board
Board extraction may be done from a running CompactPCI system. Typically you will perform the
following steps:
C Attach your antistatic wrist strap to a metallic part of the system.
C Identify the board, be sure to touch the board only at the front panel.
C Unlock the ejector lever.
C As soon as the blue hot swap LED illuminates, activate the ejector lever to pull the
CompactPCI connectors out of the backplane.
1)
C Remove any front panel and onboard cabling assembly.
C Remove the board carefully. Be sure not to damage components mounted on the
bottom side of the board by scratching neighboured front panels.
C Store board in the original packaging, do not touch any components, hold the board at
the front panel only.
Note
1)
:
To wait for the LED to illuminate is not necessary when extracting the board from a powerless
system.