User`s manual

Software Manual • EKF Intelligent I/O Controller Family On CompactPCI
- 14 -
EKF Elektronik GmbH * Philipp-Reis-Str. 4 * D-59065 HAMM (Germany)
Tel. [phone] * Fax. [phone] * E-Mail [e-mail] * Internet http://www.ekf.de
"
DEVICES_PER_BOARD
"=dword:00000010
number of ports on the board,
e.g.: CHORUS: 16, QUARTET: 4.
"
PCI_BUS_NUMBER
"=dword:00000001
number of the PCI bus where the board is
attached to.
"
PCI_BUS_SLOT
"=dword:0000000B number of the PCI device where the board
is attached to. Do not confuse this number
with the
CompactPCI
rack slot number.
"
VALID
"=dword:00000001 defines wether the board should be ignored
(VALID = 0) by the driver.
"
UART_CLOCK
"=dword:00E10000 UART clock frequency in Hz, depends on the
oscillator mounted on the board, allowed is:
3686400, 8000000,
14745600, 16000000.
Parameter\channel Subkeys
For each port one the “board_x” exists one “channel_i” subkey, where i is the one based,
running port index. The channel subkey is located under the Parameters subkey and
contains the following entries:
HKEY_LOCAL_MACHINE\...\ekf960si1\board_x\Parameters\channel_i
"
COM_PORT_NUMBER
"=dword:0000000B
number of the COM port attached to this port,
e.g. COM11.
"
NT_PORT_NUMBER
"=dword:0000000B
number of the NT device name attached to
this port, e.g. Serial11.
"
DISABLE_PORT
"=dword:00000000 defines wether the port should be disabled
(DISABLE_PORT != 0) by the driver.
Installations for the CX1-BAND CANbus controller contain also these entries for the CANbus
ports, i.e. channel_2 and channel_3 (channel_1 is a normal serial port):
"
ACCEPTANCE_CODE
"=dword:00000000
acceptance code to build the CANbus
controllers acceptance filter.
1
)
"
ACCEPTANCE_MASK
"=dword:FFFFFFFF
acceptance mask to build the CANbus
controllers acceptance filter.
1
)