Product Manual
Further functions
HemoPoint
®
H2 User Manual
46
Only instruments specifically intended for the purpose should be
connected to this interface socket, using the appropriate
connecting cable. To avoid short circuits, keep sharp metallic
objects away from the sockets.
5.6.1 Connecting to a PC
To connect the HemoPoint
®
H2 analyzer to a PC a special PC
cable and the InterLink™ Lite software program are required (see
section 10.1 “Replacement parts and consumer materials” for
ordering information). Please refer to the InterLink™ Lite
Software User Manual for further instructions.
5.6.2 Connecting a printer
The HemoPoint
®
H2 analyzer supports the connection of a Seiko
Model No. DPU-414 serial printer.
The DPU-414 can be ordered through an authorized EKF
Diagnostics distributor.
With the use of a printer you can print each patient’s test result
immediately or print patient result(s) from memory (data storage)
later (see Section 5.2.2 “Printing out results”).
Illustration 32: DPU-414 printer.
WARNING!