Product Manual

Further functions

HemoPoint

H2 User Manual

signals as well as the signals that sound at the end of the current

test.

5.5.2.2 Setting the backlight mode

Under “Menu”, sub-menu “Options”, sub-menu “Backlight” the

backlight can be switched ON or OFF when under battery

operation. If turned ON the backlight is temporarily switched on

for all entries and actions. Under electrical power operation the

backlight is always on.

Note: The backlight consumes power from the battery, and

therefore shortens the operation time of the instrument under

battery operation.

5.5.2.3 Setting the stand-by time

The HemoPoint

H2 is equipped with integrated energy

management. If the analyzer is not used for a certain time, it

switches into the stand-by mode (see Section 3.3.4 “Stand-by

mode”). Under this menu, you can set the number of minutes the

analyzer will remain active (ON), after which the instrument will

switch off.

Under “Menu”, sub-menu “Options”, sub-menu “Stand-by” the

stand-by time can be set according to your preference. Use the

appropriate arrow key to either increase or decrease the stand-by

time (in increments of 1 minute).

Illustration 30: Display screen, Stand-by.