Product Manual

9
5.2 TUBE HOLDERS
Cleaning the tube holders is not recommended. Should a tube break or a
sealant blowout occur, simply discard the affected tube and tube holder in
accordance with proper laboratory procedures and replace with a new tube
holder. Inspect and replace dirty or damaged tube holders monthly or more
frequently as needed. Replacement tube holders are available (See Section 7).
5.3 INSPECTIONS
Periodically inspect the lid, lid gasket and rotor to ensure there are no cracks or
damage. Periodically inspect for evidence of friction on the centrifuge feet and
the surface on which the centrifuge is placed. If applicable, periodically inspect
any means of fixing the centrifuge to the mounting surface and the mounting
surface itself.
5.4 SERVICE
To obtain service, contact Customer Service at 800-777-6668, 407-788-8791, or
by email at [e-mail].
All instruments or accessories must be cleaned prior to shipment to the
manufacturer for service.
When transporting the Creamatocrit Plus, removal of the rotor or placement of
packing material around the rotor will help prevent damage to the motor shaft in
the event the unit is dropped.