Operating instructions

6.1

CONNECTOR CONFIGURATION OF THE INTEGRA CONTROL PANEL

X3: Connector set to the finger scanner

Pin No.

Cable color Function

1 Yellow RS485 communication (terminal 2)

2 Green RS485 communication (terminal 1)

3 Brown Power supply (terminal 3)

4 White Power supply (terminal 4)

JMP2: Defines how relay 2 should work

Normally open contact Normally closed contact

(NO) (NC)

X6: Relay 1 screw terminal to connect the motor lock

Terminal No.

Function

1 Power supply motor lock + (equ. white X1)

2 Power supply motor lock - (equ. brown X1)

3 Switching impulse (switched white X1)

X1: Main connector plug

Pin No. Cable color Function

1 Blue Gate input terminal 1

2 Grey Gate input terminal 2

3 Yellow ekey TOCAhome terminal 2

4 Green ekey TOCAhome terminal 1

5 Brown Power supply DC- or AC

6 White Power supply DC+ or AC

7 Pink Relay 2 C

8 Red Relay 2 NO / NC (see JMP1)

JMP2