Operating instructions

30
1. DEVICE OVERVIEW 31
2. SCOPE OF DELIVERY 31
3. OPERATION 32
3.1 USING THE OPERATION KEYS OF THE CONTROL PANEL 32
3.2 INITIAL START-UP: COUPLING SCANNER AND CONTROL PANEL 32
3.3 PROGRAMMING MENU OVERVIEW: 33
3.4 RECORDING A FINGER WITH THE SENSOR (SEE FIGURE 3) 34
3.5 HOW TO ENROL A FINGER 34
3.6 ENROLING FINGER 35
3.7 DELETING A USER FROM THE SYSTEM 35
3.8 CHANGING THE SECURITY CODE 35
3.9 RESETTING TO FACTORY SETTINGS 36
4. USING THE FINGER SCANNER 37
5. TROUBLESHOOTING 39
6. TECHNICAL SPECIFICATIONS 41
6.1 CONNECTOR CONFIGURATION OF THE INTEGRA CONTROL PANEL 42
6.2 DIMENSIONS OF THE INTEGRA CONTROL PANEL 43
6.3 DIMENSIONS OF THE INTEGRA FINGER SCANNER 44
7. MOUNTING AND INSTALLATION 45
7.1 CONTROL PANEL CUTOUT 45
7.2 FINGERSCANNER CUTOUT 46
7.3 CONTROL PANEL MOUNTING 47
7.4 FINGER SCANNER MOUNTING 48
7.5 CONTROL PANEL AND FINGER SCANNER MOUNTING HEIGHT 49
7.6 DESIGN ELEMENT MOUNTING 50
7.7 DESIGN ELEMENT DISMOUNTING 50
8. WIRING EXAMPLES 51
8.1 MINIMUM INSTALLATION 51
8.2 INSTALLATION USING AN EXTERNAL SWITCH AND CONSUMER LOAD 52
8.3 INSTALLATION WITH TRADITIONAL CONTROL PANEL 53
9. MANUFACTURERS' GUARANTEE
55