Warranty
Ekena Millwork® PVC Millwork General Information & Limited Lifetime Warranty 
Terms:  Subject  to  the  terms  and  conditions  of  this  Warranty,  Ekena  Millwork  (herein  Ekena)  warrants  to  the 
Homeowner  that  PVC  products  are  free  from  manufacturing  defects  in  material  and  workmanship  if  installed 
according to our installation instructions, and will not rot, peel, flake, corrode, blister, split, chip, fade excessively 
or fade unevenly when exposed evenly. While you own your home, this Warranty will remain in effect for your 
lifetime. This warranty is not transferrable. Ekena reserves the right to discontinue, modify or otherwise alter any 
of  its  products,  including  color,  without  prior  notice.  This  Warranty  is  made exclusively  and  specifically to  the 
person(s)  who  both  owns  and  continuously  resides  in  the  home  on  which  the products  are  installed  (herein 
“Homeowner”) if  that person  is  the original  purchaser of  Ekena’s  product(s) covered  under  this  warranty.  This 
warranty is also made to a  Homeowner who purchases a newly constructed residence on which the  product is 
installed  directly  from  the  builder.  Where  Ekena’s  product(s)  are  installed  on  a  structure  (i)  not  occupied 
exclusively by the Homeowner (including his or her immediate family), (ii) used for income producing purposes, or 
(iii) used in a public or semi-public application, such as (but not limited to) a condominium, apartment building, 
house of worship, school, medical facility, senior living facility, government building, hotel, etc., then the warranty 
is  made  solely  to  the  original  owner  of  the  structure  (“Commercial  Owner”)  and  is  not  transferrable.  
The term of the Commercial Owner’s warranty is 50 years, prorated below. If Ekena determines that its product(s) 
have a manufacturing defect covered under the Terms of this Warranty, Ekena will at its option, either (1) refund 
the purchase price of the material, 
or  (2)  replace  any  product  it 
determines  has  a  manufacturing 
defect. In no event shall Ekena be 
responsible for any labor charges. 
In  the  event  of  repair, 
replacement,  refinishing  or 
coating,  the  warranty  applicable 
to  the  original  product(s)  shall 
apply  to  the  repaired,  replaced, 
refinished  or  coated  product  and 
will extend for the balance of the 
original  term  of  the  warranty 
period.   These  remedies are  the 
sole  remedies  for  any  defect  of 
the product.  
Normal  Weathering  is  defined  as  exposure  to  ultraviolet  sun  light  and  extremes  of  weather  and  atmosphere, 
which will cause any colored or painted surface to fade, darken, chalk or acquire a surface accumulation of dirt or 
stains. The severity of these conditions depends on air quality, the geographic location of the property and other 
local conditions over which Ekena has no control. Ekena shall determine, at its discretion, whether the siding is 
suffering from normal weathering (which is not covered by warranty). This conclusion shall be based on whether 
the product(s) evidences a change in color in excess of the Hunter Units as calculated according to ASTM D2244, 
as outlined in the chart herein. Product(s) must have been exposed to the same weathering conditions and not 
partially covered by other materials such as shutters, awnings, porticos or other materials. 


