Use and Care Manual

With any wall covering, you are going to want
to measure the height and width of the wall
you want to cover, or the specic area if you
are wanting cover. This would include just the
space behind your TV or a headboard focal
point for example.
Once you have your measurements, you will
take wall height and divide it by the height of
the panel and round up. Then take the width of
your wall divide by the width of the panel and
round up. Once you have those numbers, you
will multiply them together to get your total
panels needed for your accent wall.
EXAMPLE MEASUREMENTS
HOW TO MEASURE
WALL COVERINGS
100”
125”
EDGECRAFT SEAMLESS WALL TILES
Step 1:
Take the height of your wall and
divide by the height of the panel.
Height: 100”
Divide: 100” ÷ 24” = 4.166
Round Up: 5 panels tall
Step 2:
Take the width of your wall and divide by the
width of the panel.
Width: 125”
Divide: 125” ÷ 6” = 20.833
Round Up: 21 panels wide
Step 3:
Multiply number of panels high by number of
panels wide.
5 × 21 = 105 panels
3D WALL TILES
Step 1:
Take the height of your wall
and divide by the height of
the panel.
Height: 100”
Divide: 100” ÷ 11 7/8” = 8.42
Round Up: 9 panels tall
Step 2:
Take the width of your wall and divide by the
width of the panel.
Width: 125”
Divide: 125” ÷ 11 7/8” = 10.526
Round Up: 11 panels wide
Step 3:
Multiply number of panels high by number of
panels wide.
9 × 11 = 99 panels
Width: 6”
Height: 24”
Width: 11 7/8”
Height: 11 7/8”
ekenamillwork.com • [e-mail]
P: 866-607-0453 • F: 866-591-3143 • 2300 W. Main St. Clarksville, TX 75426