User's Manual

1 / 45
1. Product Overview
1.1. Product Introduction
Based on infrared thermal imaging technology, imported sensor is used to
support face recognition, body temperature measurement, and upload captured
pictures to the management platform. After face recognition passed, the access
control function would be activated. The high temperature warning value can be
preset, a warning window will pop up when high temperature is detected, and the
captured picture will be uploaded to the platform. (It is supported to preset door
open/close after warning, the default is not to open the door)
1.2. Product characteristics
⚫ Thermal imaging resolution: 32*32/12um.
⚫ Angle of field FOV: 33º*33º or 90º*90º (Confirm when ordering).
⚫ Infrared Maximum Image Size:≥320*240 (Within 0.5m).
⚫ Temperature measuring range: 30 ºC -45 ºC.
⚫ Temperature measuring accuracy:±0.5ºC.
⚫ Temperature alarm threshold: default 35.5 ºC ~ 37.5 ºC (Support customization).
⚫ Passing mode when temperature over threshold: pass through or no pass.
⚫ Man’s face mode: Alarm or no alarm.
⚫ Voice prompt of authentication result: support.
⚫ Face verification accuracy: ≥99%.
⚫ Face recognition distance: 0.3m-1m.
⚫ Max number of faces: 20000, JPG or JPEG format.
⚫ Max numver of Event records:100000.
⚫ Camera: 2MP,Hardware Wide Dynamic.
⚫ Screen: 5 inch/7 inch
⚫ CPU: Quad core A9 32bit.
⚫ RAM: 1GB DDR3.