User's Manual

18 / 45
6.6. Main parameter setting
6.6.1. Enter parameter setting
Find the corresponding equipment list, click the corresponding "hardware ID" to enter the device
parameter setting interface.
6.6.2. Set pass mode
"Full open" mode is on: only body temperature is detected, and face recognition is not performed.
"Full open" mode off: face recognition + body temperature detection is required for passing.
After entering the parameter setting interface, click "System settings" and pull down the scroll bar.
First click "get". After obtaining the equipment parameters, find the "full open mode", modify the
parameters, and finally click "Set" to save.