Instructions / Assembly

mark Archor Bolt

Spots

Drill the Hole

To Secure Archor

Bolt. Drill Bit might

not include

Secure and Fasten

Anchor Bolt

Set Up 1 Pole First

Number Name

Stainless Steel Wedge Expansion

Anchor

Part 1

Part 2

Part 3

Part 5

Part 2

Part 3

Part 4

Part 5

Metal Screw

Metal Screws steel bolts nuts

Drill Bit

L-Shaped Hex Key Wrench

Pattern

connect panel with pole using

metal screws

Part 2

3 Connect the metal panel with

Pre-setup Pole using Metal Screws

Part 4

4 5

Connect metal panel with metal screws

Reconnect the metal panels using screw bolt and nuts.Tighten the

bolt and nult using L shape Wrench; Setup another pole as Step 1 and

connect the other end of panel to the pole as step 3

Backup the metal screws previously con-

nected panels;Use drill bit to enlarge the hole;

Reconnect the panels using screw and bolts

as it show on picture 5