Installation Guide

Ejoy Garden Product

Installing on an Existing Wood Fence

Before beginning read all instructions carefully.

• Make sure your chain link fence can support the installation of bamboo fencing, if not, make the necessary adjustments and

reinforce the existing fence. Install a spacer at the bottom of the fence. This will help reduce ground contact, in turn preserve the

fence, and provide proper support when leveling.

• Pre-drill into the center of one bamboo pole. Make sure you start at the top corner.

• Use the 2 1⁄2" exterior screws to drill your bamboo to the wood panel or 2x4. Note: Don’t over tighten the screw; this will cause

the bamboo to crack. Now, continue to fasten the bamboo near the top and bottom while keeping the bamboo level. By

alternating the screws near the top and bottom every foot will insure a structurally-sound bamboo fence.

Installing on Existing Chain Link Fence

Before beginning read all instructions carefully.

• Make sure your chain link fence can support the installation of bamboo fencing, if not, make the necessary adjustments and

reinforce the existing fence. Install a spacer at the bottom of the fence. This will help reduce ground contact, in turn preserve the

fence, and provide proper support when leveling.

• Attach one end with galvanized wire at the top and the bottom, pull tight and attach panels to the chain link fence and tighten

with pliers.

• Attach the remaining portion of the bamboo panels with wires spaced approximately every 12”– 24”.

• If you need to add another roll of fencing, be sure not to overlap the two rolls and avoid gaps. Sometimes installation requires

trimming a portion of the fence. Simply untie the wires at the end and remove the number of poles need to fit. Then tie the wires,

and twist the ends of the wires together

Maintenance

To maintain the longevity and beautiful look of your new bamboo fence, we recommend a sealer (urethane finish).

Not only will your new bamboo fence look great, it’ll maintain its color and strength for many years to come.

PAGE 1
Ejoy Garden Product Installing on an Existing Wood Fence Before beginning read all instructions carefully. • Make sure your chain link fence can support the installation of bamboo fencing, if not, make the necessary adjustments and reinforce the existing fence. Install a spacer at the bottom of the fence. This will help reduce ground contact, in turn preserve the fence, and provide proper support when leveling. • Pre-drill into the center of one bamboo pole. Make sure you start at the top corner.