User`s manual

6
Chapter 1 Features and Overview
1-3 Functions and Basic Operation
To adjust the screen and color
1
Screen Adjustment
(Automatic Adjustment)
Press
.
Press again while the message window
is displayed.
Adjustment menu (Refer to page 9 for operation)
• The Adjustment menu and the FineContrast mode name
cannot be displayed at the same time.
Color Adjustment
Simple Adjustment [FineContrast mode]
This function allows easy selection of a desired mode
from five modes according to monitor application.
FineContrast mode
Page 12
Brightness Adjustment
Press or to adjust brightness.
Page 9
2
Screen Adjustment
(Advaced Adjustment)
[Adjustment menu]
[At analog signal input] [At digital signal input]
●
To eliminate vertical bars [Clock*]
… see page 10
●
To remove flickering or blurring
[Phase*] ……………………………… see page 10
●
To correct screen position
[Position*] …………………………… see page 10
●
To adjust color gradation automatically
[Range
Adjustment*] ……………… see page 11
●
To modify blurred characters/lines
[Smoothing] ………………………… see page 11
●
To set when a noise appears on the screen
[Signal Filter*]
……………………… see page 22
*
Items marked with * can be adjusted with analog
input.
Page 9
Color Adjustment
Advanced Adjustment [Adjustment menu]
●
“Brightness,” “Temperature,” “Gamma,”
“Saturation,” “Hue,” and “Gain” can be set for
each mode (Custom/sRGB/T
ext/Picture/Movie).
Settable functions vary with the display mode.
Resuming the default settings
●
To reset color adjustment [Reset]
… see page 18
Page 13
Analog input only
Page 13