CONTENTS Chapter 1 Features and Overview 1-1 Features 1-2 Buttons and Indicators 1-3 Functions and Basic Operation Chapter 2 Settings and Adjustments 2-1 Utility Disk 2-2 Screen Adjustment 2-3 Color Adjustment Important Please read PRECAUTIONS, this User’s Manual, and the Setup Manual (separate volume) carefully to familiarize yourself with safe and effective usage.
This product has acquired the TCO standard that relates to the safety, ergonomics, environment and so forth of office equipment. For an overview of the TCO, refer to our web site. http://www.eizo.com This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside this region, the product may not perform as stated in the specifications.
Notice for this monitor This product is suited to general purposes like creating documents, viewing multimedia content. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by warranty for uses other than those described in this manual.
CONTENTS Notice for this monitor .............................................. 3 2-7 Locking Buttons ............................................ 16 ● To lock operation [Adjustment Lock]................. 16 To use the monitor comfortably ............................... 3 2-8 CONTENTS ............................................................. 4 Setting Adjustment menu Display................ 17 ● To update menu settings [Menu Size/Menu Position/Menu Off Timer/Translucent/ Orientation] ..............
Chapter 1 Features and Overview Thank you very much for choosing an EIZO color LCD monitor.
1-3 Functions and Basic Operation To adjust the screen and color Analog input only 1 • The Adjustment menu and the FineContrast mode name cannot be displayed at the same time. FineContrast mode Color Adjustment Simple Adjustment [FineContrast mode] Page 12 Screen Adjustment Page 9 (Automatic Adjustment) Press . Press again while the message window is displayed.
To make useful settings/adjustments Adjustment menu (Refer to below for operation) Information/Language Page 18 ● To check settings, usage time, etc.
Chapter 2 Settings and Adjustments 2-1 Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the application software programs. ● Disk contents and software overview The disk includes a monitor information file, application software programs for adjustment, and User’s Manual. Refer to Readme.txt file on the disk for software startup procedures or file access procedures.
2-2 Screen Adjustment Digital Input Attention • Wait 20 minutes or more from monitor power on before starting adjustments. When digital signals are input, images are displayed correctly based on the preset data of the monitor. Analog Input The monitor screen adjustment is used to suppress flickering of the screen or adjust screen position and screen size correctly according to the PC to be used.
4 Perform advanced adjustments for the following using the menu of the Adjustment menu. ● To eliminate vertical bars [Clock] (1) Display Pattern 1 in full screen on the monitor using the “Screen adjustment pattern files”. (2) Choose from the menu, and press NOTE • Press the control button slowly so as not to miss the adjustment point. • When blurring, flickering or bars appear on the screen after adjustment, proceed to [Phase] to remove flickering or blurring. .
5 Adjust the signal output range. ● To adjust color gradation automatically [Range Adjustment] Every color gradation (0 to 255) can be displayed by adjusting the signal output level. (1) Display Pattern 2 in full screen on the monitor using the “Screen adjustment pattern files”. (2) Choose from the menu, and press . A message “Your setting will be lost it you press AUTO button” appears. (3) Press while the message is displayed. The output range is adjusted automatically.
2-3 Color Adjustment Simple adjustment [FineContrast mode] This function allows you to select the best display mode for monitor brightness, etc. ● FineContrast Mode An appropriate display mode is selectable out of five modes. Mode Purpose Custom Available for making desired setting. sRGB Suitable for color matching with sRGB compatible peripherals. Text Suitable for displaying texts for word processing or spreadsheets. Picture Suitable for displaying images such as photos or picture images.
Advanced Adjustments [Adjustment menu] Attention Independent setting and saving of color adjustment are available for each FineContrast mode.
Menu Description Adjustment range To adjust red, green, and 0 to 100% blue to a desired color tone Adjust the respective brightness of respectively red/green/blue to make a desired color tone. Display an image with white or gray background for adjustment. Gain NOTE • The values shown in the “%” are available only as reference. • When using the setting, the setting is set to “Off.” Reset To reset the color settings of the selected FineContrast mode to the default settings.
2-5 Screen Size Selection ● To change screen size [Screen Size] This function allows you to change the screen size when a low-resolution image is displayed. Menu Function Displays an image in full screen. Images are distorted in Full (default setting) some cases because the vertical rate is not equal to the horizontal rate. Enlarged Displays an image in full screen. In some cases, a blank horizontal or vertical border appears to equalize the vertical rate and the horizontal rate.
2-6 Power Indicator/EIZO Logo Display Setting ● To turn off the Power indicator while a screen is displayed [Power Indicator] This function enables to turn off the Power indicator (blue) while a screen is displayed. . (1) Choose from the Adjustment menu, and press (2) Choose from the menu, and press . The menu appears. (3) Select “Disable” with or , and press . The Power Indicator setting is completed.
2-8 Setting Adjustment menu Display ● To update menu settings [Menu Size/Menu Position/ Menu Off Timer/Translucent/Orientation] Menu Size Change the Adjustment menu size using the following procedure. (1) Choose from the Adjustment menu, and press . (2) Choose
2-9 Viewing Information/Setting Language ● To check settings, usage time, etc. [Information] This function allows you to check settings, model name, serial number, and usage time of the monitor. . (1) Choose from the Adjustment menu, and press The menu appears. (2) Then, press to check settings, etc. NOTE • The usage time is not always “0” when you purchase the monitor due to factory inspection.
Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor Two PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pin connector on the back of the monitor. Connection examples DIV-I connector (SIGNAL1) Attention • When using an optional signal cable (FD-C16), be sure to connect the D-sub mini 15-pin connector to the PC, and the DVI-I connector to the monitor. Wrong connection may result in no picture display.
● To set auto-switching of input signals [Input Signal] The monitor recognizes the connector through which PC signals are input. When either PC is turned off or enters the power-saving mode, the monitor automatically displays signals of another PC. Priority setting Function Auto When either PC is turned off or enters the power-saving mode, the monitor automatically displays signals of another PC. Manual The monitor does not detect the PC’s signals automatically. Select an active input signal with .
Chapter 4 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. • No-picture problems → See No.1 - No.2. • Imaging problems → See No.3 - No.11. • Other problems → See No.12 - No.17. Problems 1. 2. Possible cause and remedy No picture • Power indicator does not light. • Check whether the power cord is connected correctly. • Power indicator is lighting blue. • Power indicator is lighting yellow. • • • • The message below appears.
Problems 9. Afterimages appear. Possible cause and remedy • Use a screen saver or off timer function for a long-time image display. • Afterimages are particular to LCD monitors. Avoid displaying the same image for a long time. 10. Green/red/blue/white dots or defective dots remain • This is due to LCD panel characteristics and is not a on the screen. failure. 11. Interference patterns or fingerprints remain on the • Leave the monitor with a white or black screen. The screen. symptom may disappear. 12.
Chapter 5 Reference 5-1 Attaching an Arm The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option. [Attaching] 1 Lay the LCD monitor on a soft cloth spread over on a stable 2 Remove the stand. (Prepare a screwdriver.) 3 Attach the monitor to the arm or stand. surface with the panel surface facing down. Unscrew the four screws securing the unit and the stand with the screwdriver.
5-2 Power Saving Mode ■ Analog input This monitor complies with the VESA DPMS standard. [Power Saving System] PC Operating Power saving Power Indicator Monitor STAND-BY SUSPENDED OFF Operating Blue Power saving Yellow [Resumption Procedure] • Operate the mouse or keyboard to resume the normal screen. ■ Digital input This monitor complies with the DVI DMPM standard. [Power Saving System] The monitor enters the power saving mode in five seconds in connection with the PC setting.
5-4 Specifications LCD Panel 21.3-inch (540 mm) TFT color LCD with anti-glare hard coating Viewing angle: Vertical 178°, Horizontal 178° (CR: 10 or more) Dot Pitch 0.270 mm Horizontal Scan Frequency Analog: 24 - 80 kHz Digital: 31 - 76 kHz Vertical Scan Frequency Analog: 49 - 76 Hz (Non-interlace) (1600 × 1200: 49 - 61 Hz) Digital: 59 - 61 Hz (Non-interlace) (VGA TEXT: 69 - 71 Hz) Resolution 1600 dots × 1200 lines Max. Dot Clock Analog: 162 MHz Digital: 162 MHz Max. Display Colors 16.
Main default settings (factory settings) BrightRegulator Enable Smoothing 3 FineContrast Mode Custom Screen Size Full Input Signal Manual Off Timer Disabled Menu Settings Menu Size Normal Menu Off Timer 45 seconds Language English Outside Dimensions unit : mm (inch) Connector Pin Assignment • DVI-I connector 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Pin No. C1 C2 C3 C4 C5 Signal Pin No. Signal Pin No.
• D-sub mini 15-pin connector 3 4 5 10 15 9 1 2 8 7 6 14 13 12 11 Pin No. Signal Pin No. Signal Pin No. Signal 1 Red 6 Red ground 11 (Short-circuited to pin 10) 2 Green 7 Green ground 12 Data (SDA) 3 Blue 8 Blue ground 13 H. Sync 4 Ground 9 NC 14 V. Sync 5 NC 10 Ground 15 Clock (SCL) • USB port Upstream Downstream Contact No.
Gamma Generally, the monitor brightness varies nonlinearly with the input signal level, which is called “Gamma Characteristic”. A small gamma value produces a low-contrast image, while a large gamma value produces a highcontrast image. Phase Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment is made to adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted correctly.
5-6 Preset Timing The following table shows factory preset video timing (for analog signal only). Mode Dot clock VGA 640×480@60Hz 25.2 MHz VGA 720×400@70Hz 28.3 MHz Macintosh 640× 480@67Hz Macintosh 832× 624@75Hz Macintosh 1152× 870@75Hz Macintosh 1280× 960@75Hz 30.2 MHz 57.3 MHz 100.0 MHz 126.2 MHz PC-9801 640×400@56Hz 21.0MHz PC-9821 640×400@70Hz 25.2 MHz VESA 640×480@72Hz 31.5 MHz VESA 640×480@75Hz 31.5 MHz VESA 800×600@56Hz 36.0 MHz VESA 800×600@60Hz 40.0 MHz VESA 800×600@72Hz 50.
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO Inc. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: FlexScan S2100 is in conformity with Part 15 of the FCC Rules.
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden.
关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」，适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项，在自制造日起算的年限内，不会 产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 （Pb） （Hg） （Cd） （Cr（VI） ） （PBB） （PBDE） 印刷电路板 × ○ ○ ○ ○ ○ 机箱 ○ ○ ○ ○ ○ ○ 液晶显示器 × × ○ ○ ○ ○ 其他 × ○ ○ ○ ○ ○ ○： 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量要求以下。 ×： 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定的限量要求。 ( 企业可在此处 , 根据实际情況对上表中打“×” 的技术原因进行进一步说明 ) 32
7th Edition-April, 2013 Copyright © 2005-2013 EIZO Corporation All rights reserved. 03V21735G1 (U.
