user manual

12
Chapter 2 Settings and Adjustments
● To correct screen position [Position]
(1) Select
(Position).
(2) Adjust the position with (Left) / (Right) / (Down) /
(Up) to display the image properly in the display area of the
monitor.
(3) Select .
The adjustment is completed.
5
Adjust the color gradation.
● To adjust color gradation automatically [AutoRange]
Every
color gradation (0 to 255) can be displayed by adjusting the
signal output level.
(1) Display Pattern 2 in full screen on the monitor using the “Screen
AdjustmentUtility”orthescreenadjustmentpatternles.
(2) Press .
The adjustment menu appears.
(3) Select (Analog).
(4) Select (AutoRange).
Color gradation is adjusted automatically.
(5) Afterconrmingthescreenmessage,select (OK).
If you select (Undo), the monitor returns to the pre-adjusted status.
(6) Close the Pattern 2. When using the “Screen Adjustment Utility”,
close the program.
Note
• Since the number of pixels and the
pixelpositionsarexedontheLCD
monitor, only one position is provided
to display images correctly. The
position adjustment is made to shift
an image to the correct position.
• When vertical bars appear on the
screen after adjustment, go back to
“To eliminate vertical bars [Clock]”.
(Clock→Phase→Position)
Note
• Since the number of pixels and the
pixelpositionsarexedontheLCD
monitor, only one position is provided
to display images correctly. The
position adjustment is made to shift
an image to the correct position.
• When vertical bars appear on the
screen after adjustment, go back to
“To eliminate vertical bars [Clock]”.
(Clock→Phase→Position)