user manual

10
Chapter 2 Settings and Adjustments
2-2 Screen Adjustment
Digital Input
When digital signals are input, images are displayed correctly based on the
preset data of the monitor. When performing the advanced adjustment, see “2-3
Color Adjustment” (page 13) and its subsequence pages.
Analog Input
Themonitorscreenadjustmentisusedtosuppressickeringofthescreenor
adjust screen position and screen size correctly according to the PC to be used.
To use the monitor comfortably, adjust the screen when the monitor is set up for
thersttimeorwhenthesettingsofthePCinuseareupdated.Noadjustment
is required when the image appears correctly.
The auto adjust function works in the following cases:
• When
asignalisinputintothemonitorforthersttime
• When the resolution or Vertical/Horizontal Frequency of input
signals is changed
[Adjustment Procedure]
1
Perform the AutoSize adjustment.
●  Toadjustickering,screenposition,andscreensize
automatically [AutoSize]
(1) Press
.
The adjustment menu appears.
(2) Select (Analog).
(3) Select (AutoSize).
Flickering, screen position, and screen size are adjusted automatically.
(4) Afterconrmingthescreenmessage,select (OK).
If you select (Undo), the monitor returns to the pre-adjusted status.
2
Prepare the display pattern for the analog display adjustment.
(1) Load the “EIZO LCD Utility Disk” to your PC.
(2) ForWindowsPC:Startthe“ScreenAdjustmentUtility”fromthe
startup menu on the disk.
 ForotherthanWindowsPC:Usethescreenadjustmentpatternles.
If the screen is not displayed correctly even after adjusting in step
1 above, perform the adjustments according to the procedures on
the following pages. When the screen is displayed correctly, go to
step 5 “To adjust color gradation automatically [AutoRange]”.
Attention
• This function works correctly when
an image is fully displayed over the
Windows or Macintosh display area.
It does not work properly when an
image is displayed only on a part of
the screen (command prompt window,
for example) or when a black
background (wallpaper, etc.) is in use.
• This function does not work correctly
with some graphics boards.
• “Auto in Progress” appears on the
screen during auto adjustment.
Attention
• This function works correctly when
an image is fully displayed over the
Windows or Macintosh display area.
It does not work properly when an
image is displayed only on a part of
the screen (command prompt window,
for example) or when a black
background (wallpaper, etc.) is in use.
• This function does not work correctly
with some graphics boards.
• “Auto in Progress” appears on the
screen during auto adjustment.
Note
• For how to open and use the screen
adjustmentpatternles,referto
“Readme.txt”orthe“readme”le.
When you are using a Macintosh PC,
youcanopentheledirectlyfromthe
start menu of the disk.
Note
• For how to open and use the screen
adjustmentpatternles,referto
“Readme.txt”orthe“readme”le.
When you are using a Macintosh PC,
youcanopentheledirectlyfromthe
start menu of the disk.
Attention
• Wait 30 minutes or more from
monitor power on before starting
adjustments.
• Auto
adjust function does not work
for the images under the resolution of
800 × 600 (SVGA).