user manual

31
Chapter3SettingMonitor
3-9. Changing DUE (Digital Uniformity Equalizer)
Setting
The DUE setting can be changed.
Settings Function
Brightness Makesthebrightnessandcolorofthewholescreenuniformwithoutchangingthe
maximumbrightnessandcontrastratio.Thebrightnessofahighgradationareaisnot
corrected.Selectthissettingtoprioritizethelevelsofthebrightnessandcontrastoverthe
uniformityinthehighgradationarea.
Uniformity(Default
setting)
Makesthebrightnessandcolorofthewholescreenuniform.Thebrightnessofahigh
graduationareaisalsocorrectedsoitisuniform.Selectthissettingtoprioritizethe
uniformityoverthelevelsofthebrightnessandcontrastinthehighgradationarea.
Attention
• To change the DUE setting, the adjusted monitor display must be readjusted. Perform the target adjustment again using
ColorNavigator or ColorNavigator Elements. Regarding ColorNavigator and ColorNavigator Elements, see “To use
ColorNavigator/ColorNavigator Elements” (page 10).
Procedure
1. Press
to turn off the monitor.
2. Holding
down, press for at least two seconds to turn on the monitor.
The “Optional Settings” menu appears.
3. Choose “DUE Priority” from “Optional Settings”, and press .
4. Select “Uniformity” or “Brightness” with
or , and press .
5. Select “Finish” with
or .
6. Press
.