User`s manual

English

5. ATTACHING A STAND

The LCD monitor can be used with other stand by removing the tilt stand and attaching

the stand to the LCD monitor.

NOTE

• When attaching an arm or stand, follow the instructions of their user’s manual.

• When using another manufacturer’s arm or stand, confirm the following in advance

and select one conforming to the VESA standard.

- Clearance between the screw holes: 100 mm x 100 mm

- Thickness of plate: 2.6 mm

- Strong enough to support weight of the monitor unit (except the stand) and

attachments such as cables.

• Attach an arm or stand to meet the following tilt angles of the monitor.

- Up 45 degrees, down 0 degrees (Within operating range)

• Please connect cables after attaching a stand.

Setup Procedure

1. Hold the center of the stand mounting cover and slide them

rightward or leftward to remove the mounting cover.

2. Lay the LCD monitor down. Do not scratch the panel.

3. Remove the tilt stand by loosening the 4 screws.

Stand mounting cover