User guide

13
English
Prior to use Installation TroubleshootingSetting/Adjustment
Displaying the Screen
1
Check that the main power switch of the monitor is on.
2
Turn on the monitor by pressing on the remote control (or on the
monitor).
The monitor’s Power indicator lights up blue.
3
Turn on the external device.
4
Switch the input signal to display the desired image sent from the device.
Press , or . Each time you press the button, the input signal switches to the other.
PC PC1
g
PC2...
VIDEO VIDEO1
g
VIDEO2...
HDMI HDMI1
g
HDMI2...
n When receiving an analog signal from the PC
When turning on the monitor and PC for the rst time with the analog signal, the Auto Screen Adjust
function works to adjust the clock, phase, and screen position automatically.
When digital signal is input from PC, images are displayed correctly based on the preset data of the
monitor.
Attention
• Turn off the monitor if you do not use the monitor for a long time. Unplugging the power cord
completely shuts off power supply to the monitor.
Adjusting Sound Volume
1
Press or on the remote control.
Pressing raises the volume, and pressing reduces
the volume.
Volume adjustment menu
4