User guide

10
English
●
Connect a USB device
1. Connect USB devices (keyboard, mouse, etc.) to the USB port (downstream) on the monitor.
Connectors on the
monitor
USB
Downstream
Keyboard
Mouse
Attention
• After connecting the USB devices and turning on the monitor, the USB function is set up
automatically.
• This monitor may not work properly depending on the PC, OS or USB devices used. (For USB
compliance of the respective devices, consult their manufacturers.)
• USB device does not work when the main power switch of the monitor is off.
NOTE
• The PC (PC1 or PC2) on which the USB devices work switches automatically in conjunction with input signal
switching. The PC on which the USB devices work can also be specied. For details, refer to the User’s Manual
on the “EIZO LCD Utility Disk” (CD-ROM).
TroubleshootingSetting/AdjustmentPrior to use Installation