Installation manual

6. Initial InstallationDiamond digital
89
6.11.4 LOADING THE SOFTWARE
Please read in the service information ”Readme.txt” on your update disk whether
you are requested to erase the FLASH EPROMS before starting the load proce-
dure of the new software. See section 7.
The following procedure has to be carried out three times, i.e. successively for
each individual file of the disk in the sequence Panel, E-Box Master , E-Box Slave.
• Connect the respective controller with the PC.
• Switch on the PC and start the load program by running install.exe on your
harddisc.
The screen displays the menu below which enables you to stop or continue the
program procedure.
DD5..DD30 FLASH Load Program Version 1.0
Copyright (c) 1993 by
BTS - Broadcast Television Systems
Please read readme.txt first!
continue program (y/n)?
• When continuing the load program, the next menu will be displayed and enables
you to recall the software information readme.txt also directly. Help can be de-
manded via the HELP menu.