Installation manual

6. Initial InstallationDiamond digital
81
6.10.3 FADER CONNECTOR PANEL RC 1855
The faders in the control panels are each provided with connector panel RC 1855
which establishes the connection to controller RY 1821. A 4-step DIP switch (T1)
on the connector panel determines the input channel of the 12-bit A/D converter.
On each of these connector panels, exactly one switch has to be set to ON,
the other switches have to be switched off!
Assignment is as follows::
Switch no. 1 : ME1
2 : ME2
3 : PP
4 : EXTRA
The faders in the control panels DD5 and DD10 have to be configurated for ”ME1”.
The three faders in the DD20 control panel have to be configurated for ”ME1”, ”
PP”and ”EXTRA”