Installation manual

1. GeneralDiamond digital

1.4.3 VIDEO OUTPUTS

The switcher is provided with the following video outputs:

• 4 program outputs

• 1 clean-feed output (before or between DSK, switchable)

• 1 output for second DSK preview in PP stage

• 3 program outputs for each mixing level

For preview purposes, the following outputs are available:

• 1 preview output for each mixing level, mask signal and wipe pattern signal

can be additively connected with the video signal.

• 1 preset output for preset/program stage, mask signal and wipe pattern sig-

nal can be additively connected with the video signal.

All outputs are delay-compensated. The digital horizontal and vertical blanking in-

tervals are transparent for the background signal. For the case of routing switcher

changeovers in the vertical blanking interval, the lines 6 and 319 are faded to black.

1.4.4 FURTHER OUTPUTS

For special applications (integration of a DVE, preview of sources, measuring pur-

poses), the switcher is provided (standard feature) with 5 (DD10) or 5 to 11

(optional for DD20 and 30) serial AUX outputs which can be optionally connected

with the following signals:

• all inputs

• all central mattes

• PGM: ME 1-2, PP, DSK (depending on the expansion phase)

• PVW: ME 1-2, PP, DSK (depending on the expansion phase)

• the signals of the frame stores (4:2:2)

• DVE output; for background/fill per ME, selectable

• DVE output for key per ME, selectable

Selection is made on the control panel or the external AUX control units.

1.4.5 REMOTES

The following interfaces are provided:

• 3 serial interfaces RS 422 for edit, DVE, external routing switchers.

• 1 serial interface; RS 423 (ES-BUS) or RS 422, switchable.

• 8 universal interface inputs (general-purpose interface, GPI) and 8 GPI out-

puts.

• For red tally, one potenial-free contact is provided per source. Furthermore,

the individual mixing levels are indicated.

• Tally input