Installation manual

8. Notes for special Editors and DVEsDiamond digital

11.2 DVES

Selection of sequences.

Runtime has to be set to 30s.

Select DVE PRIZM as port protocol within switcher setup.

Standard RS422 cable can be used.

VTR protocol

No sequence selection.

Runtime (effects duration, within time menu) has to be set to 30s.

Select DVE VTR as port protocol within switcher setup.

A57 setup

Select Sony protocol.

Set edit offset to one minute.

Enable remote control on A57 keyboard.

RS232 protocol

Sequence selection, fader transitions possible, no scaling necessary, runs only at

9600bps.

Select DVE A53D as port protocol within switcher setup.

Select RS232 protocol on Abekas A57 for port B.

Set header 2 on A57’s address port to RS232 (see A57 technical guide, Fig. 36).

Use cable with following connections:

Diamond

9-polig 9-polig

Abekas A57

TxD RxD

RxD

RTS

CTS

GND

TxD

GND

PINNACLE PRIZM

ABEKAS A57