Installation manual

8. DVE and Editors DD5, DD10, DD20, DD30
134
8.3.7 AMPEX ADO 100 / 500 / 1000
Not tested with DD switchers. The interaction was tested with the R132ME analoge
switcher. As the same protocol is used, no problems are anticipated.
Connection cable: Standard RS-422 cable
DD switcher setup
and installation:
Serial port: Port 1 or port 2 or port 3
Protocol in switcher setup: DVE ADO
DVE setups and
installations:
Select AVC protocol.
For DVE effect gen-
eration please note:
No scaling required.
Possible
functions:
Sequence selection.
Sequence run with switcher fader.
Particularities: At present the DVE Aux buses cannot be remote controlled.