Installation manual

7. Description of the InterfaceDiamond digital
121
As an accessory, the tally distributor RC1959 is available for the mixer making
available all inputs and outputs for TALLY and GPI on connector blocks. For this
purpose, the tally distributor can be mounted in the rear of the equipm ent cabinet
and is connected with five connector cables to the TALLY / GPI connectors of the
Ebox terminal panel. The Tally distributor consists of distribution board RC1940
and the five connector cables. The cable length is 2 m. Therefore, the distributor
can be mounted at a free position within the equipment cabinet. If, depending on
the projection, long cable lengths are required, make sure it is to be that protected
cables are used. The pin assignment is 1:1.
BTS cable with variable length:
Cable Type Order number
50-pin plug/hub S5050–001 0 979 093 001
25-pin plug/hub S2525–001 0 979 063 001
9-pin plug/hub S0909–001 0 979 033 001
When ordering, indicate the cable length.
12
12
Tally OutTally Out GPI In/Out Tally In
EBox
TALLY IN 1 TALLY IN 2 TALLY OUT 1 TALLY OUT 2 GPI IN/OUT
TALLY IN TALLY IN
TALLY SOURCE OUT TALLY MON OUT
GPI OUT
DC IN
GPI IN
RC 1940
TALLY DISTRIBUTOR
BTS
J1 J2 J3 J4 J5
Cabling between EBox
and tally distributor
Tally distributor