Installation manual

7. Description of the InterfaceDiamond digital
111
The assignment of the video signals to the keys of the AUX control panels CP-330
and CP-300 cannot be changed, however, it depends on the electronics box se-
lected at the control panel. For DD20 and DD30, only CP-330 (with 48 source
selection keys) should be used, in order to be able to select all signals. For DD10
and DD5, both panels can be used. The lower row of CP-300 (keys 24 .. 47) has
the same assignment as the upper one.
Key
DD20 and DD30
Input or
internal signal
Key
DD5 and DD10
Input or
internal signal
0 Black 0 Black
1 IN 01 1 IN 01
⇓ ⇓ ⇓ ⇓
32 IN 32 16 IN 16
33 COL1 17 COL
34 COL2 18 VIDEO STORE
35 VIDEO STORE 19 CLEAN
36 MONT PROC 1 20 PVW
37 MONT PROC 2 21 PGM
38 ME1 22 Black
39 ME2 23 Black
40 PP (= PGM) 24 Black
41 PVW ME1 25 IN 01
42 PVW ME2 ⇓ ⇓
43 PVW PP 40 IN 16
44 ME1 KEY 41 COL
45 ME2 KEY 42 VIDEO STORE
46 CLEAN 43 CLEAN
47 Black 44 PVW
45 PGM
46 Black
47 Black
In case of delegation the AUX panels to external crossbars (Ext Aux 1...6) the fol-
lowing assignment is valid:
Key Signal __
0 Input 0 of external crossbar
1 Input 1 of external crossbar
L L
47 Input 47 of external crossbar
AUX assignment
for internal busse
AUX assignment
for external
AUX busses