Installation manual

6. Initial InstallationDiamond digital
91
6.11.5 CLEARING THE RAM FILES
The following steps have to be carried out only if requested by the software informa-
tion readme.txt on the update disk.
• Recall the MSKERMIT program and establish with ”C” <Enter> connection to
the switcher controller.
The screen displays again the respective Service menu.
D30 Service Menu
––––––––––––––––
device: DD–PANEL
user: COMMON
software version [V]
integrated error diagnosis [I]
DICMAC direct control and memory access [D]
halt normal operation [H]
KERMIT file transfer [K]
change KERMIT user [U]
change device name [N]
show network [S]
install options [O]
* I
Integrated Error Diagnosis
––––––––––––––––––––––––––
display diagnostic messages [D]
interactive tests [I]
clear RAM–files [C]
BTS personnel only [B]
exit [E]
* C
do you really want to loose memory contents ?⁄ ( ALL / Query / No )
* ALL
select individual file with Y/N:
ACCESS ? cleared
ASSIGN ? cleared
CONF–EB ? cleared
CONF–PA ? cleared
COUPLE ? cleared
IDENT ? cleared
MACRO–PA ? cleared
PATT–USR ? cleared
SEL–EBOX ? cleared
STATE–EB ? cleared
STATE–PA ? cleared
SYSTEM ? cleared