User`s manual
Table Of Contents
- FlexScan T2351W User's Manual
- Cover
- CONTENTS
- Chapter 1 Introduction
- Chapter 2 Adjusting Screens
- 2-1. Compatible Resolutions/Formats
- 2-2. Setting the Resolution
- 2-3. Displaying Screen Correctly
- 2-4. Adjusting Color
- To select the display mode (FineContrast mode)
- To perform advanced adjustments
- Adjustable settings in each mode
- To adjust brightness
- To adjust black level
- To adjust contrast
- To adjust color temperature
- To adjust gamma
- To adjust the color saturation
- To adjust hue
- To adjust gain
- To reduce image blur
- To set overdrive intensity
- 2-5. Changing the Screen Size
- Chapter 3 Setting Monitor
- Chapter 4 Power Saving Functions
- Chapter 5 Connecting Cables
- Chapter 6 Troubleshooting
- Chapter 7 Reference
- Appendix

33
Chapter4PowerSavingFunctions
4-3. Enabling/Disabling Automatic Brightness
Adjustment “Auto EcoView”
The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness
automatically and comfortably by using the Auto EcoView function.
Attention
• Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function.
Procedure
1. Press
.
The “EcoView” menu appears.
2. Choose “Auto EcoView” with or . (Alternatively, you can use to select it.)
3. Select “On” or “Off” with
or .
4. Press
to exit the adjustment.
Note
• For this reason, as <Brightness> in the Adjustment menu is changed, the auto adjustment range is also changed.
4-4. Setting Indicator “EcoView Index”
By using the EcoView Index function, the indicator that shows the level of power saving appears at the time of
turning on the monitor, adjusting the brightness or switching the FineContrast mode. The power saving ratio
comes to high as the indicator level meter lights towards right.
Procedure
1. Press
.
The “EcoView” menu appears.
2. Choose “EcoView Index” with or . (Alternatively, you can use to select it.)
3. Select “On” or “Off” with
or .
4. Press
to exit the adjustment.
4-5. Enabling/Disabling Auto Power-OFF <Off Timer>
This function allows you to specify whether to turn on/off the monitor automatically after a specied time has
elapsed in the power saving mode.
Adjustable range
Disable, Enable (0, 1, 2, 3, 5, 10, 15, 20, 25, 30, 45 min, 1-5 h)
Procedure
1. Choose <PowerManager> from the Adjustment menu, and press
.
2. Choose <Off Timer> from the <PowerManager> menu, and press
.
The <Off Timer> menu appears.
3. Select “Enable” or “Disable” with or .
If “Enable” is selected, set a monitor Off time with or .
4. Press to exit the adjustment.