User`s manual
Table Of Contents
- FlexScan T2351W User's Manual
- Cover
- CONTENTS
- Chapter 1 Introduction
- Chapter 2 Adjusting Screens
- 2-1. Compatible Resolutions/Formats
- 2-2. Setting the Resolution
- 2-3. Displaying Screen Correctly
- 2-4. Adjusting Color
- To select the display mode (FineContrast mode)
- To perform advanced adjustments
- Adjustable settings in each mode
- To adjust brightness
- To adjust black level
- To adjust contrast
- To adjust color temperature
- To adjust gamma
- To adjust the color saturation
- To adjust hue
- To adjust gain
- To reduce image blur
- To set overdrive intensity
- 2-5. Changing the Screen Size
- Chapter 3 Setting Monitor
- Chapter 4 Power Saving Functions
- Chapter 5 Connecting Cables
- Chapter 6 Troubleshooting
- Chapter 7 Reference
- Appendix
27
Chapter3SettingMonitor
Chapter 3 Setting Monitor
3-1. Adjusting Volume <Volume>
This function allows you to adjust the volume.
Adjustable range
0 to 30
Procedure
1. Choose <Sound> from the Adjustment menu, and press
.
2. Choose <Volume> from the <Sound> menu, and press
.
The volume adjustment menu appears.
3. Use or for adjustment.
4. Press
to exit the adjustment.
Note
• Alternatively, you can use or for adjustment (see “1-2. Controls and Functions” (page 8)).
• The volume for the HDMI and stereo mini jacks can be set individually.
3-2. Switching sound source for HDMI signal input
<Source>
This function allows you to switch sound source for HDMI signal input. You can select the HDMI or stereo
mini jack.
Procedure
1. Choose <Sound> from the Adjustment menu, and press
.
2. Choose <Source> from the <Sound> menu, and press
.
The Source adjustment menu appears.
3. Select “HDMI” or “Stereo Mini Jack” with or .
4. Press
to exit the adjustment.
Note
• This function is available with HDMI signal input. However, if a DVI-HDMI adapter cable is used, the sound source
is automatically “Stereo Mini Jack” and cannot be changed.