User`s manual
Table Of Contents
- FlexScan T2351W User's Manual
- Cover
- CONTENTS
- Chapter 1 Introduction
- Chapter 2 Adjusting Screens
- 2-1. Compatible Resolutions/Formats
- 2-2. Setting the Resolution
- 2-3. Displaying Screen Correctly
- 2-4. Adjusting Color
- To select the display mode (FineContrast mode)
- To perform advanced adjustments
- Adjustable settings in each mode
- To adjust brightness
- To adjust black level
- To adjust contrast
- To adjust color temperature
- To adjust gamma
- To adjust the color saturation
- To adjust hue
- To adjust gain
- To reduce image blur
- To set overdrive intensity
- 2-5. Changing the Screen Size
- Chapter 3 Setting Monitor
- Chapter 4 Power Saving Functions
- Chapter 5 Connecting Cables
- Chapter 6 Troubleshooting
- Chapter 7 Reference
- Appendix

23
Chapter2AdjustingScreens
●
To adjust the color saturation <Saturation>
This function allows you to adjust color saturation.
Adjustable range
-128 to 127
Procedure
1. Choose <Color> from the Adjustment menu, and press
.
2. Choose <Saturation> from the <Color> menu, and press
.
The <Saturation> menu appears.
3. Use or for adjustment.
4. Press
to exit the adjustment.
Attention
• Using this function may make some color gradations unavailable for display.
Note
• The minimum value (-128) changes the screen to monochrome.
●
To adjust hue <Hue>
This function allows you to adjust hue.
Adjustable range
-32 to 32
Procedure
1. Choose <Color> from the Adjustment menu, and press
.
2. Choose <Hue> from the <Color> menu, and press
.
The <Hue> menu appears.
3. Use or for adjustment.
4. Press
to exit the adjustment.
Attention
• Using this function may make some color gradations unavailable for display.